Transmitter

The THD series temperature/humidity transducers have built-in temperature and humidity sensors and are capable of various outputs including DC 4-20 mA, 1-5 VDC, RS485 communication. The temperature sensors have a range of -19.9 to 60.0°C and the...

The THD series temperature/humidity transducers have built-in temperature and humidity sensors and are capable of various outputs including DC 4-20 mA, 1-5 VDC, RS485 communication. The temperature sensors have a range of -19.9 to 60.0°C and the...

The DAT8024 acts as a 4 Channel fully isolated Modbus TCP Ethernet Base 10/100T Communication to 4-20mA or 0-10V Output. This product gives both active and passive outputs. Other outputs are -10 v to +10 V and -20 to 20 mA. The Outputs, Ethernet and...

The DAT8130 Modbus TCP converter makes use of Ethernet Base 10/100T Communication with 8 Digital inputs and 4 Relay Outputs. There are on state values for the Digital inputs are 10 to 30 V and the off state is below 3 V. The 4 relays are SPDT. The inputs...

The DAT8148 acts as a 16 Channel Digital input to Modbus TCP converter which uses Ethernet Base 10/100T Communication. This product’s on state is voltage above 10 V and off state is voltage below 3 Volts. The input, power supply are kept in...

The DAT8188 acts as am 8 Digital input and 8 Digital PNP Output to Modbus TCP converter which uses Ethernet Base 10/100T Communication. This product’s state is voltage above 10 V and off state is voltage below 3 Volts. This product also has 8 PNP...

The DAT7014 receives inputs from RTD's, Resistors and Potentiometers. The analog signal is transformed to 16 Bit data and Transmitter by the CANopen protocol. This product conforms to CiA DS 301 and CiA DS 401 and can border directly with the CAN...

The DAT7015 receives Voltage and Current inputs. The range of the inputs can be -10V to 10V and the mA input can be - 20mA to 20mA. The analog signal is transformed to 16 Bit data and Transmitter by the CANopen protocol.This product conforms to CiA DS...

The DAT7016 receive inputs from up to 4 Thermocouples or mV. All standard types of thermocouples can be accepted. The analog signal is transformed to 16 Bit data and Transmitter through the use of CANopen protocol. This product conforms to CiA DS 301...

The DAT7130 receives inputs from up to 8 digital inputs and is able to drive 4 relay outputs. The analog signal is transformed to 16 Bit data and Transmitter by the CANopen protocol. This product conforms to CiA DS 301 and CiA DS 401 and can interface...

The DAT7148 receives inputs from up to 16 digital inputs. The analog signal is transformed to 16 Bit data and Transmitter by the CANopen protocol. This product conforms to CiA DS 301 and CiA DS 401 and can interface directly with the CAN Controllers that...

The DAT7188 receivesinputs from up to 8 digital inputs and has the capability to drive 8 PNP digital outputs. The analog signal is transformed to 16 Bit data and Transmitter by the CANopen protocol. This product conforms to CiA DS 301 and CiA DS 401 and...

The Modbus RTU Datalogger DAT9000DL acts a Data Acquisition unit with a built in SD Ram port having the ability to take a Micro SD card. This product is a Modbus master and Modbus slave and has RS485, RS232 and Ethernet Communication ports. This product...

The Modbus RTU Master DAT9000 acts as a Data Acquisition and controller unit that can be used as a Modbus Master or Modbus Slave. This product contains an Ethernet 10 Base-T MODBUS TCP Interface, along with RS485 Master and Slave ports, and an RS232 port...

The Modbus RTU Master DAT9000 acts as a Data Acquisition and controller unit that can be used as a Modbus Master or Modbus Slave. This product contains an Ethernet 10 Base-T MODBUS TCP Interface, along with RS485 Master and Slave ports, and an RS232 port...

The Data Logger DAT9000DLIO acts as a Data Acquisition unit which comes with a built in SD Ram port that can take a Micro SD card. This product also has 4 digital inputs and 2 relay outputs. This product is also a Modbus master and Modbus slave and has...

The Data Logger DAT9000DLIO acts as a Data Acquisition unit which comes with a built in SD Ram port that can take a Micro SD card. This product also has 4 digital inputs and 2 relay outputs. This product is also a Modbus master and Modbus slave and has...

The Modbus RTU Master with Analog IO device DAT9011 acts as a Modbus master which has the ability to control a network of Modbus slaves. This product is an intelligent device which has the ability to read and write the field values and perform logical...

The Modbus Data Logger DAT9011DL and DAT9011USB act as Data Acquisition units having the ability to store registers that are on a Modbus RTU network. This products stores registers to an SD Memory card and the DAT9011USB stores to a USB Flash drive. The...

The Modbus Data Logger DAT9011DL and DAT9011USB act as Data Acquisition units having the ability to store registers that are on a Modbus RTU network. This products stores registers to an SD Memory card and the DAT9011USB stores to a USB Flash drive. The...