Datexel Current and Voltage Converter Din Rail Mount Type - DAT4531-D

Analog Input and Output, Galvanic isolation, CE mark, High Accuracy – Great Quality

The isolated converter DAT 4531 D is able to measure voltage and current signals. In function of programming, the measured values are converted in a current or voltage signal.

The device guarantees high accuracy and performances stability both versus time and temperature.

The programming is made by the dip-switch located in the window on the side of the enclosure. By means of dip-switches it is possible to select the input type and range and the output type without recalibrate the device.

Moreover, by Personal Computer the user can program all of the device's parameters for his own necessity.

The terminals of the current signal on input side must be only connected to active current loop.

The 1500 Vac galvanic isolation on all ways (input, output and power supply) eliminates the effects of all ground loops eventually existing and allows the use of the converter in heavy environmental conditions found in industrial applications.

The DAT 4531 D is in compliance with the Directive UL 61010-1 for US market and with the Directive CSA C22.2 No 61010-1 for the Canadian market.

It is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.

Datexel Current and Voltage Converter Din Rail Mount Type DAT 4531-D features following advantages:

• Configurable input for voltage and current
• Configurable output in current or voltage
• Configurable by dip-switch or PC
• High accuracy
• On-field reconfigurable
• Galvanic isolation among the ways
• UL / CE mark
• Suitable for DIN rail mounting in compliance with EN-50022 and EN-50035

Input for DAT 4531-D

• Voltage 0 V 10 V
• Current 0 mA 20 mA

Output Current and Voltage Converter DAT 4531-D

• Current 0 mA 20 mA
• Voltage 0 V 10 V

Response time (10÷ 90%)

• about 100 ms

POWER SUPPLY

• Power supply voltage 18 .. 30 Vdc
• Reverse polarity protection 60 Vdc max

Current consumption

• Current output 35 mA max.
• Voltage output 20 mA max.

ISOLATION

• Among all the ways 1500 Vac,
• 50 Hz, 1 min

ENVIRONMENTAL CONDITIONS

• Operative Temperature -20°C .. +60°C
• UL Operative Temperature -10°C .. +60°C
• Storage Temperature -40°C.. +85°C
• Humidity (not condensed) 0 .. 90 %
• Maximum Altitude 2000 m
• Installation Indoor
• Category of installation II
• Pollution Degree 2

MECHANICAL SPECIFICATIONS

• Material Self-extinguish plastic
• IP Code IP20
• Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
• Tightening Torque 0.8 N m
• Mounting in compliance with DIN rail standard EN-50022 and EN-50035
• Weight about 90 g.

CERTIFICATIONS

• EMC (for industrial environments)
• Immunity EN 61000-6-2
• Emission EN 61000-6-4

UL

• US Standard UL 61010-1