Datexel
Signal Converter Voltage and Current Input and Output - DAT4631 D
- SKU:
- DAT 4631-D
- Weight:
- 90.00 Grams
Description
Datexel Signal Converter Voltage and Current Input and Output - DAT4631 D
Voltage Splitter, Output configurable in current or voltage, Highly Accurate – made in Italy
The isolated doubler/converter DAT 4631 D is able to measure voltage and current signals. In function of programming, the measured values are converted in a current or voltage signal. The device guarantees high accuracy and performances stability both versus time and temperature.
The programming is made by the dip-switch located in the window on the side of the enclosure. By means of dip-switches it is possible to select the input type and range and the output type without recalibrate the device.
Moreover, by Personal Computer the user can program all of the device's parameters for his own necessity.
It is possible to configure the two output signals with independent settings either with configuration by PC or by dip-switches.
The terminals of the current signal on input side must be only connected to active current loop.
The 1500 Vac galvanic isolation on all ways (input, outputs and power supply) eliminates the effects of all ground loops eventually existing and allows the use of the converter in heavy environmental conditions found in industrial applications.
The DAT 4631 D is in compliance with the Directive UL 61010-1 for US market and with the Directive CSA C22.2 No 61010-1 for the Canadian market.
It is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.
The advantages and features for Signal Converter DAT4631 D:
- Configurable input for voltage and current
- Double output configurable in current or voltage
- Configurable by dip-switch or PC
- High accuracy
- On-field reconfigurable
- Galvanic isolation among the ways
- UL / CE mark
- Suitable for DIN rail mounting in compliance with EN-50022 and EN-50035
Input Signal Converter DAT4631 D
- Voltage 0 V 10 V
- Current 0 mA 20 mA
Output Signal Converter DAT4631 D
- Current 0 mA 20 mA
- Voltage 0 V 10 V
Response time (10÷ 90%)
- about 100 ms
POWER SUPPLY
- Power supply voltage 18 .. 30 Vdc
- Reverse polarity protection 60 Vdc max
Current consumption
- Current output 55 mA max.
- Voltage output 25 mA max.
ENVIRONMENTAL CONDITIONS
- Operative Temperature -20°C .. +60°C
- UL Operative Temperature -10°C .. +60°C
- Storage Temperature -40°C.. +85°C
- Humidity (not condensed) 0 .. 90 %
- Maximum Altitude 2000 m
- Installation Indoor
- Category of installation II
- Pollution Degree 2
MECHANICAL SPECIFICATIONS
- Material Self-extinguish plastic
- IP Code IP20
- Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
- Tightening Torque 0.8 N m
- Mounting in compliance with DIN rail standard EN-50022 and EN-50035
- Weight about 90 g.
CERTIFICATIONS
- EMC (for industrial environments) Immunity EN 61000-6-2, Emission EN 61000-6-4
UL
- US Standard UL 61010-1
Series Information
Temperature and signal converters “SLIM SERIES”
The line of converters “SLIM series” has been designed to provide to the user the highest flexibility in the signals conversion.
The series is composed of:
- Converters for universal input with double output and trip amplifier (DAT4530)
- Single channel converters dedicated for typology of input (DAT4531)
- Double channel converters (two independent inputs and outputs) dedicated for typology of input (DAT4532)
- Signal splitters dedicated for typology of input (DAT4631)
- Mathematical modules (DAT4632D)
- Frequency converters (DAT4540)
It is possible to program the devices either via dip-switches to set the most common input and output ranges or via Personal Computer using the software DATESOFT by which the user can personalize the input and output ranges for his own necessities.
About Datexel:
Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.
The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.
Documents
To View Data Sheet for Datexel Signal Converter Voltage and Current Input and Output - DAT4631 D Please Click HereAdditional Information
Input:Channel A: |
Current 4-20mA, Range 0-20mA Minimum span 1 mA. Voltage Range from 0 to 10 V Minimum span 1 V. See Data sheet for range |
Input:Channel B: |
Current 4-20mA, Range 0-20mA Minimum span 1 mA. Voltage Range from 0 to 10 V Minimum span 1 V. See Data sheet for range |
Output: |
2 X 4-20mA, 0-20mA, 0-10V |
Power Supply: |
18 to 30 Vdc. Reverse polarity protection 60 Vdc |
Current Consumption: |
Current output 55 mA max. Voltage output 25 mA max |
Temperature rating: |
Operative -4°F +158°F -20°C +70°C Temperature Storage Temperature -40°F +185°F -40°C +85°C |
Humidity: |
(non condensing) 0-90% |
Housing: |
Material self-extinguishing |
Dimensions: |
3 1/2" x 4 1/2 " x 1/2", 90 x 112x x 12.5 mm |
Weight: |
3 oz 90 g |
EMC: |
For industrial environments. Immunity: EN 61000-6-2. Emission: EN 61000-6-4 |