DIN Rail Signal Converter Voltage and Current Input, Voltage and Current Output - DAT 5022

(No reviews yet) Write a Review
90.00 Grams
Minimum Purchase:
1 unit


Datexel 4 ways isolated programmable signal converter / signal splitter - DAT5022

Multiple Input/ Output, Galvanic isolation, Italian made


The converter DAT 5022 is designed to provide on output two voltage or current signals proportional with the value of the normalized signal applied on its input.

The user can program the input and outputs ranges by the proper DIP-switches available after opening the suitable door located on the side of device (see "Input ranges table" and "Outputs ranges table" sections).

On the top of device there are the led PWR to signal the correct power supply condition and the ZERO and SPAN potentiometers for the regulation of Zero and Span values.

The 1500 Vac isolation between input, power supply and the outputs eliminates the effects of all ground loops eventually existing and allows the use of the converter in heavy environmental conditions found in industrial applications.

The DAT 5022 provides on the input side an auxiliary supply source to connect both active and passive current loops.

The DAT 5022 is in compliance with the Directive UL 61010-1 for US market and with the Directive CSA C22.2 No 61010-1 for the Canadian market.

Moreover, it provides on each output side an auxiliary supply source to connect both active and passive loads.

It is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in according to EN-50022 and EN-50035 standards.

The advantages for DAT 5022 Datexel:

  • Input for voltage and current signal
  • Input and output ranges configurable by DIP-switches
  • Two independent output channels
  • Isolated power supply source for passive current transmitter on input
  • Isolated power supply source for passive loads on outputs
  • Galvanic isolation at 1500 Vac between input, power supply and outputs
  • Led for signaling correct power supply condition
  • UL / CE mark
  • DIN rail mounting in compliance with EN-50022 and EN-50035

Input type for Datexel DAT5022

Input for this model is as follows:

  • Voltage: 0 V 10 V, 2 V 10 V, 0 V 5 V, 1 V 5 V
  • Current: 0 mA 20 mA, 4 mA 20 mA

Output type

Output for this temperature transmitter is:

  • Voltage: 0 V 10 V, 2 V 10 V, 0 V 5 V, 1 V 5 V
  • Current: 0 mA 20 mA, 4 mA 20 mA

Power supply

Power supply voltage for Datexel DAT5022 is the standard 20 to 32 VDC. Also Reverse polarity protection is 60 VDC max.


Among all the ways 1500 Vac, 50 Hz, 1 min


  • Operative Temperature -20°C ... +60°C
  • UL Operative Temperature -10°C ... +60°C
  • Storage Temperature -40°C... +85°C
  • Humidity (not condensed) 0 ... 90 %

Temperature & humidity Consideration

  • Operative temperature -20°C ... +70°C
  • Storage temperature -40°C ... +85°C
  • Humidity (not condensed) 0 ... 90 %


  • Material Self-extinguish plastic
  • IP Code IP20
  • Wiring wires with diameter 0.8-2.1 mm2 /AWG 14-18
  • Tightening Torque 0.8 N m
  • Mounting in compliance with DIN rail
  • standard EN-50022 and EN-50035
  • Weight about 90 g.


  • Furnace
  • Oil and gas
  • Brick manufacturing
  • Heat Exchangers
  • Industrial Processes
  • Heating/cooling systems

Series Information

"P.D.S. SERIES": temperature and signal transmitters The P.D.S. (programmable by dip-switches) series transmitters and converters

can accept on their input signals coming from 2 or 3 wires Pt100. Thermocouple and Strain Gauge sensors or Voltage and Current signals.

  • Single and double channel 4-20 mA two wires transmitters for Pt100 input without galvanic isolation (DAT2065, DAT2066)
  • 4-20 mA two wires transmitter for Thermocouple input without galvanic isolation (DAT2045)
  • Single and double channel converters for Pt100 input with configurable output as voltage or current without galvanic isolation (DAT2165, DAT2166)
  • Isolated converter for Pt100 input with configurable output as voltage or current (DAT2061)
  • Converter for Thermocouple input with configurable output as voltage or current without galvanic isolation (DAT2145)
  • Isolated signal converters with configurable input and output as voltage or current (DAT5020. AT5021, DAT5023I, DAT5023V)
  • Isolated signal splitter with configurable input and output as voltage or current (DAT5022)
  • Isolated signal converter for Strain Gauge input with configurable output as voltage or current (DAT5025) and converters for DIN rail mounting

About Datexel

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.


You may want to read this product's catalog. If so, please click to view the DAT5022 datasheet.
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

Signal type voltage (configurable):
Min: 0, 2, 0, 1V. Max: 10, 10, 5, 5V.
Signal type current (configurable):
Min: 0, 20mA. Max: 4, 20mA.
Input impedance:
Current: ~ 50 Ω. Voltage: ≥ 1 MΩ.
Auxiliary Supply:
18 Vdc min @ 20 mA.
Output adjustments:
Zero ± 5 % of f.s. minimum. Span ± 5 % of f.s. minimum.
Output impedance:
Current: ≤ 500 Ω. Voltage: ≥ 5 KΩ.
Auxiliary supply (Aux. supply out):
12 Vdc min @ 20 mA.
Calibration error:
± 0.1 % of f.s.
Linearity error:
± 0.05 % of f.s.
Thermal drift:
± 0.02 % of f.s./°C.
Response time (10÷ 90%):
< 10 ms.
Power supply voltage:
20 …32Vdc.
Reverse polarity protection:
60 Vdc max.
Current consumption current output:
Current output 80 mA max. Voltage output 40 mA max.
Current consumption max (***):
Among all the ways:
1500 Vac, 50 Hz, 1 min.
Operative temperature:
-20°C …+60°C.
UL Operative temperature:
Storage temperature:
Humidity (not condensed):
0 …90 %.
Maximum altitude:
Category of installation:
Pollution Degree:
Self-extinguish plastic.
IP code:
Wires with diameter 0.8÷2.1 mm2 /AWG 14-18
Tightening torque:
0.5 Nm.
In compliance with DIN rail standard EN-50022 and EN-50035
About 90g.
EN 61000-6-2.
EN 61000-6-4.
US standard:
UL 61010-1.
Canadian standard:
CSA C22.2 No 61010-1.
Open Type device.
Industrial Control Equipment
File no.:
View AllClose