Autonics CT6M-2P2 Counter Timer

Write a Review
500.00 Grams
Minimum Purchase:
1 unit
Calculated at Checkout


The CT series digital counter/timers from Autonics are integrated units with functions of counters and timers. The units feature various input/output operation modes and load contact capacity up to 5A for flexible applications in diverse industries. The RS485 models allow remote parameter configuration and monitoring via PCs. The CT series is available in 4-digit and 6-digit models in 3 Standard DIN sizes (48 × 48, 72 × 72, and 96 × 96 mm).

The CT6M-2P2 from Autonics is a counter and timer with 6 digits LED, W72 x H72, 2 preset, 2relays + 3 NPN output, 24-48 VDC/ 24VAC.

The CT6M-2P2 from Autonics comes with the following upgraded functions:

  • DIN W48 x H48mm, W72 x H36, W72 x H72 counter/timer.
  • Available to set 6 digits (0.00001 to 999999) pre-scale value (4 digit 0.001 to 9999).
  • Built-in MOBUS communication function (communication model).
  • Available to set the one-shot output time in 10ms (0.001 to 9999).
  • Increased contact capacity to 5A (CTS, CTM series).
  • Available to set Count Start Point (initial value).
  • Improved to select memory protection function in the indicator.
  • Added BATCH counter function (CTM series).
  • Added counter UP-1/UP-2, Down-1/Down-2 input modes.
  • Added counter TOTAL/HOLD operation modes in the indicator.
  • Added timer TOTAL/HOLD/On-Time display operation modes in the indicator.
  • Added timer INT2/NFD.1/INTG. Output modes.
  • Added timer range 9999.999s/9999m59/99999.9h.

Product Specifications



  •  Digits


  •  Digit size

Single preset


Single preset


  • Power supply

Single preset

100-240VAC 50/60Hz

Single preset

24VAC 50/60Hz/24-48VDC.

  • Allowable voltage range

90 to 110% of voltage rated.

  • Power consumption

Single preset

Max. 12VA.

Single preset

AC max. 10VA/DC Max: 8W

  • INA/INB max. counting speed

Selectable 1cps/30 cps/5k cps/10k cps.

  • Min. input signal width


Reset signal. Selectable 1ms, 20ms.


INA, INH, RESET, INHIBIT, BATCH RESET: Selectable 1ms, 20ms.

  • input

Selectable Voltage input or No-voltage input.

[Voltage input] input impedance is 5.4KΩ, ‘H’ level: 5-30VDC, ‘L’ level 0-2VDC.

[No-voltage input] short-circuit impedance Max. 1kΩ, residual voltage, Max.2VDC.

  • One-shot output

Count, timer: Selectable 0.01s to 99.99s.








  • Control output

Without com.

Contact output

Dual preset: SPST (1a) 1EA, SPDT (1c) 1EA.

Single preset: 2 NPN open collector.

Solid-state output

Dual preset: 3 NPN open collector.

Single preset: 2 NPN open collector.

Without com.

Contact output

Dual preset: SPST (1a) SPDT (1 C).

Single preset: SPDT (1c).

Solid-state output

Dual preset: 2 NPN open collector.

Single preset: 2NPN open collector.

Without com.

Contact output

250VAC, 5A resistive load.

Solid-state output

30VDC Max. 100mA max.

  • External sensor power

12VDC ±10%, 100mA max.


  • Memory retention

10 years (when using non-volatile semiconductor memory type).



  • Timer

Repeat error

Power ON start: Max ±0.1 0.01%, 0.05s.

Signal start: Max ±0.01%, ±0.03s.

SET error

Voltage error

Temp. error

  • Insulation resistance

100MΩ (at 500VDC megger).

  • Dielectric strength

2000VAC 50/60Hz for 1 min.


  • Noise strength

±2KV the square wave noise (pulse width: 1µs) by the noise simulator.


  • Vibration


0.75mm Amp. at freq. 0f 10-55Hz (for 1min.) in each X, Y, Z directions for 1 hour.


0.5mm Amp. at freq. 0f 10-55Hz (for 1min.) in each X, Y, Z directions for 10 min.


  • Shock


300m/s2 (approx. 30G) in each X, Y, Z directions for 3 times.


100m/s2 (approx. 10G) in each X, Y, Z directions for 3 times.


  • Relay life cycle


Min. 10,000,000 operations.


Min. 100,000 operations.

  • Protection

IP65 (front panel only).


  • Environment

Ambient temp.

-10~55◦C, storage -25~65◦C.

Ambient humidity

35-85% HR, storage: 35-85% HR.

  • Approval


  • Unit weight

Approx. 253g.

Communication Specifications

  • Protocol

Mobus RTU (16 bit CRC).

  • Connection method


  • Application standard

Compliance with EIA RS485.

  • No. of connections

31, it is available to set address 1 to 127.

  • Communication method

Half duplex.

  • Synchronous method


  • Communication distance

Within max. 800M.

  • Communication speed

2,400, 4,800, 9,600, 19,200, 38,400bps (Factory default: 9600bps).

  • Response waiting time

5-99ms (factory default: 20ms).

  • Start bit

1 bit (fixed).

  • Data bit

8 bits (fixed).

  • Parity bit

None, even, odd (factory default: none).

  • Stop bit

1, 2 bit (factory default: 2 bit).


Brand Information

“Autonics” is a leading provider of automation solutions from South Korea. They develop and manufacture a wide range of automation products that are marketed worldwide. Their core products include various sensors, controllers, and motion devices, measuring equipment, laser marking systems, connection equipment and more. Autonics products are trusted and adopted by engineers in various industrial applications and their technology is widely applied in day-to-day automation devices.

With 12 international offices in South Korea, China, Japan, India, Vietnam, Indonesia, Malaysia, Russia, Turkey, USA, Brazil, Mexico, Autonics is able to provide comprehensive automation solutions for their customers across the globe.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose