Saudi Arabia Client Project
GET YOUR QUOTE HERE
Add your custom quote for bulk products purchase, and we will provide you with lowest prices, free shipping and outstanding services.
Client Request
Measuring the jump height of people up to 2.65 cm.
Challenges
● Short time for implementing the project
● Designing and implementing the project should be in a way that it can be assembled and disassembled without the presence of technical person
● The project assembly should be light enough to be transported by plane
Solution
For this project, we used 3 thin metal cans connected with bolts and nuts, a wooden box with 9 mil MDF covered with plexiglass, 7 photo sensors, 7 timers, light, a buzzer, and an emergency switch.
The project was tested and ready to be delivered within 4 days.
We were able to deliver the entire project in four separate pieces because of the type of material used, the appropriate coding of the wires, and the concentration of most of the sensors and controllers in the wooden housing.
With the basic training and instruction sheet that we prepared, the customer was able to assemble this project without the need of an expert in Saudi Arabia.
The special and accurate packaging done by our logistics team was also an important factor for trouble free delivery of the project to customer in Saudi Arabia.
This end result of the project works in such a way that when a person jumps with the intention of hitting the ball, the height of the jump is sensed by the sensors located at certain distances from the ground, and the light corresponding to that height is turned on, and only the last sensor in the height of 2.65, which is the record of Cristiano Ronaldo, will be activated when the ball shakes due to the header, which was achieved by setting the sensor and focusing it on the ball.
The client was very satisfied with this project, and this was the third time we had a project request from this client..
Used Products in This Project
Multi-Function Analog Timer - AT11DN
AUTONICS
Autonics AT11DN timer is an 11-pin socket type timer with an analog type dial for easy adjustments.
The AT11DN has a variety of selectable timer modes, functions, and ranges, which makes this product a convenient universal timer application choice.
Autonics Power Supply ( SMPS ) DIN RAIL Mountable SPB-120-24
AUTONICS
The SPB series switching mode power supplies offer high power conversion efficiency and stable power supply with low noise and ripple and minimal heat generation. The switching mode power supplies can be easily clipped onto DIN-Rails or mounted using screws. The slim and compact design also allows space-saving installation.
Autonics Counter & Timer Timers AT11EN
AUTONICS
Timer, Analog, 6-Mode, Multi-Range, 2 SPDT, 100-240VAC/24-240 VDC, 11 Pin (socket req'd)
Controller Socket 8 Pin, 3.5 Bolt Standard - PS-08
AUTONICS
The Autonics socket PS-08 are used with plug-in and they provide easier installation, good electrical conductivity, and longevity.