Description
Product Overview
The Autonics AT11DN is a multi function analog timer designed for industrial control applications requiring selectable timing modes and relay-based switching. It supports a time setting range from 0.05 seconds to 100 hours, Signal ON Start operation, multiple timing modes including ON Delay, OFF Delay, ON/OFF Delay, Flicker, and Interval, and a DPDT (2 Form C) time-limit relay output. The standard model features a universal 100–240 VAC / 24–240 VDC power supply and an 11-pin plug-in configuration for panel-mounted control systems.
Key Features
- Multi-function timer with selectable timing operation modes
- Signal ON Start timing operation
- Supports Signal ON Delay, Signal OFF Delay, Signal ON-OFF Delay, Flicker, and Interval output modes
- Time setting range from 0.05 seconds to 100 hours
- Universal power supply: 100–240 VAC, 50/60 Hz or 24–240 VDC
- 11-pin plug-in configuration
- No-voltage input for START, RESET, and INHIBIT control signals
- Time Limit DPDT (2 Form C) relay output
- CE, UKCA, cRUus, RoHS, and EAC compliance marks shown in the manufacturer’s product information
Ordering Information
The Autonics AT11DN model code identifies the timer series, plug configuration, output type, and standard power-supply version.
| Model Code | Description |
|---|---|
| AT | Analog Timer series |
| 11 | 11-pin plug type |
| DN | Time Limit DPDT (2 Form C) relay output |
| No Mark | Universal power supply: 100–240 VAC, 50/60 Hz or 24–240 VDC |
| Parameter | AT11DN Configuration |
|---|---|
| Series | AT Analog Timer |
| Model | AT11DN |
| Output Configuration | Time Limit DPDT (2 Form C) |
| Plug Configuration | 11-pin plug type |
| Power Supply | 100–240 VAC, 50/60 Hz or 24–240 VDC universal |
| Included Accessory | Mounting bracket |
Socket requirement: The compatible PG-11 or PS-11(N) 11-pin socket is sold separately and is not included with the timer.
Technical Specifications
Product Identity
| Parameter | AT11DN Specification |
|---|---|
| Model | AT11DN |
| Function | Multi Function Timer |
| Control Time Setting Range | 0.05 sec to 100 hours |
| Time Operation | Signal ON Start |
| Return Time | Max. 100 ms |
| Plug Type | 11-pin plug type |
Power Supply
| AT11DN Version | Power Supply |
|---|---|
| AT11DN | 100–240 VAC, 50/60 Hz or 24–240 VDC universal |
| AT11DN-1 | 12 VDC |
| AT11DN-2 | 24 VAC, 50/60 Hz or 24 VDC |
| Parameter | Specification |
|---|---|
| Allowable Voltage Range | 90 to 110% of rated voltage |
Power Consumption
| Power Supply | Maximum Power Consumption |
|---|---|
| 100–240 VAC | Max. 3.5 VA |
| 24–240 VDC | Max. 1.5 W |
| 24 VAC | Max. 4 VA |
| 24 VDC | Max. 1.5 W |
| 12 VDC | Max. 1 W |
Control Inputs
| Parameter | AT11DN Specification |
|---|---|
| Input Functions | START, RESET, INHIBIT |
| Input Method | No-voltage input |
| Minimum Input Signal Width | Approx. 50 ms |
Control Output
| Parameter | AT11DN Specification |
|---|---|
| Contact Type | Time Limit DPDT, 2 Form C |
| Contact Capacity at AC | 250 VAC, 5 A resistive load |
| Contact Capacity at DC | 24 VDC, 5 A resistive load |
Relay Life Cycle
| Parameter | AT11DN Specification |
|---|---|
| Mechanical Life | Minimum 10,000,000 operations |
| Electrical Life | Minimum 100,000 operations at 250 VAC, 5 A resistive load |
Timing Error Characteristics
| Parameter | AT11DN Specification |
|---|---|
| Repeat Error | Max. ±0.2% ±10 ms |
| Setting Error | Max. ±5% ±50 ms |
| Voltage Error | Max. ±0.5% |
| Temperature Error | Max. ±2% |
Electrical Insulation
| Parameter | AT11DN Specification |
|---|---|
| Insulation Resistance | 100 MΩ at 500 VDC megger |
| Dielectric Strength | 2,000 VAC, 50/60 Hz for 1 minute |
Environmental Conditions
| Parameter | AT11DN Specification |
|---|---|
| Operating Ambient Temperature | -10 to 55°C |
| Storage Temperature | -25 to 65°C |
| Operating Ambient Humidity | 35 to 85% RH |
| Storage Humidity | 35 to 85% RH |
| Environmental Condition | No freezing or condensation |
Approval
| Parameter | AT11DN Specification |
|---|---|
| Approvals Shown in the Instruction Manual | CE, cRUus |
Time Setting Range
The Autonics AT11DN provides an overall adjustable timing range from 0.05 seconds to 100 hours. The time unit and range are selected from the front-panel controls, and the required time is then set using the adjustment dial.
| Time Unit | Available Range Selections | Adjustable Coverage |
|---|---|---|
| Seconds | 0.5, 1.0, 5, 10 | 0.05 to 10 sec |
| Minutes | 0.5, 1.0, 5, 10 | 0.05 to 10 min |
| Hours | 0.5, 1.0, 5, 10 | 0.05 to 10 hours |
| 10-Hour Scale | 0.5, 1.0, 5, 10 | 0.5 to 100 hours |
Overall Adjustable Timing Range: 0.05 seconds to 100 hours.
Wiring and Control Interface
The AT11DN uses an 11-pin plug-in connection with dedicated terminals for the power supply, control inputs, and Time Limit DPDT relay output.
Control Input Functions
| Input | Function |
|---|---|
| START | Starts the timing operation. |
| RESET | Resets the timer and clears the current timing cycle. |
| INHIBIT | Temporarily pauses the timing operation while retaining the elapsed time. |
The control inputs operate as no-voltage inputs, with a minimum input signal width of approximately 50 ms.
Dimensions
The Autonics AT11DN uses a standard 48 × 48 mm front-panel format for panel installation. All dimensions are in millimetres.
Main Mechanical Dimensions
| Parameter | Dimension |
|---|---|
| Front Panel Width | 48 mm |
| Front Panel Height | 48 mm |
| Front Bezel Width | 48.6 mm |
| Main Body Width | 44.9 mm |
| Main Body Height | 44.8 mm |
| Body Depth | 50 mm |
Panel Cut-out Dimensions
| Parameter | Specification |
|---|---|
| Required Panel Cut-out | 45 × 45 mm |
| Cut-out Tolerance | +0.6 / 0 mm |
| Minimum Horizontal Installation Pitch | 65 mm |
| Minimum Vertical Installation Pitch | 65 mm |
Data Sheet
You may be searching for this product's catalog. If so, please click to view the Autonics AT11DN datasheet.Additional Information
Operation method: |
Time setting |
Output Operation: |
SIGNAL ON DELAY, SIGNAL OFF DELAY, SIGNAL ON-OFF DELAY, FLICKER, INTERVAL |
Time operation: |
SIGNAL ON START |
Terminal: |
11-pin plug |
Power supply: |
100-240VAC~, 24-240VDC |
Setting range: |
0.05 to 0.5 sec, 0.1 to 1 sec, 0.5 to 5 sec, 1 to 10 sec, 0.05 to 0.5 min, 0.1 to 1 min, 0.5 to 5 min, 1 to 10 min, 0.05 to 0.5 hour, 0.1 to 1 hour, 0.5 to 5 hour, 1 to 10 hour, 5 to 50 hour, 10 to 100 hour |
Signal Input Method: |
No-voltage input(NPN) |
Control output: |
Time-limit SPDT (1c): 2 |
Related Products
Related Products
Capacitive Sensor M18, PNP NO - CR18-8DP
Autonics
Multi-Function Analog Timer - AT8N
Autonics
Inductive Sensor M12, PNP NO - PRL12-4DP
Autonics
Pressure Transducer 0-10 bar, 0-10 V, G1/4
Hogller
Photo Sensor 20m Sensing Distance, NPN Open Collector - BRQM20M-TDTA
Autonics