null
Datexel

Programmable signal converter Current and Voltage Output - DAT5020

(No reviews yet) Write a Review
SKU:
DAT5020
MPN:
DAT5020
Weight:
90.00 Grams
Minimum Purchase:
1 unit

Description

Datexel Programmable signal converter DAT5020

Current and voltage input, Accurate Output, Made in Italy

The converter DAT 5020 is designed to provide on its output a voltage or current signal proportional with the value of the normalised signal or the potentiometer
applied on its input.

The user can program the input and output ranges by the proper DIP-switches available after opening the suitable door located on the side of device (see “Input
ranges table” and “Output ranges table” sections).

The regulation of Zero and Span values is made by the ZERO and SPAN potentiometers located on the top of device.

The 2000 Vac isolation between input, power supply and output eliminates the effects of all ground loops eventually existing and allows the use of the converter
in heavy environmental conditions found in industrial applications.

On the input side, an auxiliary supply source isolated from the power supply is provided; this allows to connect on input both active and passive current loops.
It has been made in compliance with the Directive 2004/108/EC on the Electromagnetic Compatibility.

It is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in according to EN-50022 and EN-50035 standards .

Datexel Signal Convertor DAT5020 has the following features:

  • Input for voltage, current and potentiometer signal
  • Input range configurable by DIP-switches
  • Isolated power supply source for passive current transmitter on input
  • Voltage or current output
  • Output values configurable by DIP-switches
  • Galvanic isolation at 2000 Vac between input, power supply and output
  • Good accuracy and performance stability
  • EMC compliant – CE mark
  • DIN rail mounting in compliance with EN-50022 and EN-50035

Input type for Datexel Signal Convertor DAT5020

  • Signal type (configurable) Current: 4 ÷ 20 mA, 0 ÷ 20 mA,
  • Voltage: 0÷10 V, 0÷1 V, ± 5 V, ± 10 V, 0 ÷100 mV
  • Potentiometer ( nominal value ) : from 1 KΩ up to 5 KΩ
  • Maximum input signal 30 Vdc or 50 mA
  • Input impedance Voltage: >/= 1 MΩ, Current: ~ 50 Ω
  • Auxiliary supply (Aux. supply ) 18 Vdc min @ 20 mA

Output for Datexel Signal Convertor DAT5020 is as follows

  • Signal type (configurable) Current: 4 ÷ 20 mA, 0 ÷ 20 mA,
  • Voltage: 0÷10 V, 0÷2 V, ± 5 V, ± 10 V, ± 1 V
  • Maximum output signal 15 Vdc or 30 mA
  • Zero regulation ± 5 % min.
  • Span regulation ± 5 % min.
  • Load resistance (Rload) Current output: </= 500 Ω
  • Voltage output: >/= 5 KΩ

Temperature Condition:

  • Operating temperature -20 ÷ 60 °C
  • Storage temperature - 40 ÷ 85 °C
  • Relative humidity (non cond.) 0 ÷ 90%
  • Weight approx. 90 g

Industries/applications

  • Furnace
  • Oil and gas
  • Brick manufacturing
  • Heat Exchangers
  • Industrial Processes
  • Heating/cooling systems

Series Information

“P.D.S. SERIES”: temperature and signal transmitters The P.D.S. (programmable by dip-switches) series transmitters and converters

can accept on their input signals coming from 2 or 3 wires Pt100. Thermocouple and Strain Gauge sensors or Voltage and Current signals.

  • Single and double channel 4÷20 mA two wires transmitters for Pt100 input without galvanic isolation (DAT2065, DAT2066)
  • 4÷20 mA two wires transmitter for Thermocouple input without galvanic isolation (DAT2045)
  • Single and double channel converters for Pt100 input with configurable output as voltage or current without galvanic isolation (DAT2165, DAT2166)
  • Isolated converter for Pt100 input with configurable output as voltage or current (DAT2061)
  • Converter for Thermocouple input with configurable output as voltage or current without galvanic isolation (DAT2145)
  • Isolated signal converters with configurable input and output as voltage or current (DAT5020. DAT5021, DAT5023I, DAT5023V)
  • Isolated signal splitter with configurable input and output as voltage or current (DAT5022)
  • Isolated signal converter for Strain Gauge input with configurable output as voltage or current (DAT5025) and converters for DIN rail mounting

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

To View Data Sheet for Datexel Programmable signal converter DAT5020 Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

Signal type (configurable):
Current: 4 ÷ 20 mA, 0 ÷ 20 mA, Voltage: 0÷10 V, 0÷1 V, ± 5 V, ± 10 V, 0 ÷100 mV Potentiometer (nominal value) : from 1 KΩ up to 5 KΩ.
Maximum input signal:
30 Vdc or 50 mA.
Input impedance:
Voltage: >/= 1 MΩ, Current: ~ 50 Ω.
Auxiliary supply (Aux. supply ):
18 Vdc min @ 20 mA.
Signal type (configurable):
Current: 4 ÷ 20 mA, 0 ÷ 20 mA, Voltage: 0÷10 V, 0÷2 V, ± 5 V, ± 10 V, ± 1 V.
Maximum output signal:
15 Vdc or 30 mA.
Zero regulation:
± 5 % min.
Span regulation:
± 5 % min.
Load Resistor.nce (Rload):
Current output: /= 5 KΩ. Voltage output: >/= 5 KΩ.
Performance:
none
Current:
Min 0mA. Max.20mA.
Voltage:
Min.0V. Max.10V.
Output resolution:
none
Calibration error:
± 0.1 % of f.s.
Linearity error (*):
± 0.15 % of f.s.
Thermal drift:
0.02 % of f.s./°C.
Response time (from 10 to 90 % of f.s.):
500 ms.
Power supply voltage (**):
18÷32 Vdc
Current consumption(***):
Current output: 110 mA max. Voltage output: 80 mA max.
Electromagnetic Compatibility (EMC) ( for industrial environment ):
Immunity: EN 61000-6-2; Emission: EN 61000-6-4.
Isolation voltage:
2000 Vac, 50 Hz, 1 min.
Operating temperature:
-20 ÷ 60 °C.
Storage temperature:
-40 ÷ 85 °C.
Relative humidity (non cond.):
0 ÷ 90%.
Weight:
Approx. 90g.
View AllClose