Description
Overview
The Autonics ATN Series consists of multi-function analog timers for industrial timing control. The series supports 6 output operation modes, 16 selectable time setting ranges, and an overall adjustable time range from 0.05 seconds to 100 hours.
Time values, time ranges, and output operation modes are configured using the front-panel analog dial and selector switches. The series includes 8-pin and 11-pin plug-in models, with different timing functions, output configurations, control inputs, and power supply options depending on the selected model.
Product Information Notice: The information presented on this page is intended to provide a concise overview of the product and its main features. For final product selection, engineering evaluation, installation, wiring, and complete technical specifications, always refer to the official manufacturer datasheet and product documentation.
Main Features
- 6 output operation modes, with supported functions varying by model
- 16 selectable time setting ranges
- Overall adjustable time range from 0.05 seconds to 100 hours
- Front-panel analog dial and selector switches for time value, time range, and output mode configuration
- Power and time-limit output LED indicators
- 8-pin and 11-pin plug-in models
- Multiple power supply versions:
- 100–240 VAC, 50/60 Hz or 24–240 VDC
- 24 VAC, 50/60 Hz or 24 VDC
- 12 VDC
Time Setting Range
The Autonics ATN Series provides 16 selectable time setting ranges, allowing timing adjustment from 0.05 seconds up to 100 hours. The available adjustment range depends on the selected time unit and range setting.
Overall Adjustable Time Range: 0.05 seconds to 100 hours
Time Ranges for sec / min / hrs
| Display Setting | Adjustable Range | Time Unit |
|---|---|---|
| 0.5 | 0.05–0.5 | sec / min / hrs |
| 1 | 0.1–1 | sec / min / hrs |
| 5 | 0.5–5 | sec / min / hrs |
| 10 | 1–10 | sec / min / hrs |
Time Ranges for ×10 hrs
| Display Setting | Adjustable Range | Time Unit |
|---|---|---|
| 0.5 | 0.5–5 | ×10 hrs |
| 1 | 1–10 | ×10 hrs |
| 5 | 5–50 | ×10 hrs |
| 10 | 10–100 | ×10 hrs |
Note: The actual timing range is determined by the selected time unit (sec, min, hrs, or ×10 hrs) together with the selected range setting.
Supported Timing Functions
The available output operation modes vary depending on the ATN Series model. Refer to the tables below for the supported timing functions.
AT8N Models
| Display Code | Output Operation Mode |
|---|---|
| A | Power ON Delay |
| A1 | Power ON Delay 1 (One-shot Output) |
| B | Power ON Delay 2 |
| F | Flicker (OFF Start) |
| F1 | Flicker 1 (ON Start) |
| I | Interval |
AT11DN / AT11EN Models
| Display Code | Output Operation Mode |
|---|---|
| A | Signal ON Delay |
| F | Flicker (OFF Start) |
| F1 | Flicker 1 (ON Start) |
| C | Signal OFF Delay |
| D | Signal ON/OFF Delay |
| I | Interval |
Note: The supported output operation modes depend on the selected ATN Series model. Refer to the specific model documentation for detailed timing diagrams and operating sequences.
Technical Specifications
Operating and Output Specifications
| Parameter | AT8N | AT11DN | AT11EN |
|---|---|---|---|
| Function | Multi-function timer | Multi-function timer | Multi-function timer |
| Return Time | ≤ 100 ms | ≤ 100 ms | ≤ 100 ms |
| Time Operation | Power ON Start | Signal ON Start | Signal ON Start |
| Control Inputs | — | INHIBIT, START, RESET | INHIBIT, START, RESET |
| Minimum Signal Width | — | Approx. 50 ms | Approx. 50 ms |
| Control Output | Relay | Relay | Relay |
| Contact Type | Time Limit DPDT (2C), or Time Limit SPDT (1C) + Instantaneous SPDT (1C) | Time Limit DPDT (2C) | Time Limit SPDT (1C) + Instantaneous SPDT (1C) |
No-Voltage Input Specifications
Applicable to AT11DN and AT11EN models:
| Parameter | Specification |
|---|---|
| Short-Circuit Impedance | ≤ 1 kΩ |
| Short-Circuit Residual Voltage | ≤ 0.5 VDC |
| Open-Circuit Impedance | ≥ 100 kΩ |
Contact Capacity
Relay contact ratings are specified for resistive loads in accordance with IEC EN 60947-5-1.
| Model | Rated Current | AC Resistive Load AC-12 | DC Resistive Load DC-12 |
|---|---|---|---|
| AT8N | 5 A | 250 VAC, 5 A | 30 VDC, 5 A |
| AT11DN | 5 A | 250 VAC, 5 A | 24 VDC, 5 A |
| AT11EN | 5 A | 250 VAC, 5 A | 30 VDC, 5 A |
Timing Error
| Parameter | Specification |
|---|---|
| Repeat Error | ≤ ±0.2% ±10 ms |
| Setting Error | ≤ ±5% ±50 ms |
| Voltage Error | ≤ ±0.5% |
| Temperature Error | ≤ ±2% |
Electrical Specifications
| Parameter | Specification |
|---|---|
| Permissible Voltage Range | 90–110% of rated voltage |
| Power Consumption | Varies according to model and power supply version |
| Insulation Resistance | ≥ 100 MΩ at 500 VDC |
| Dielectric Strength | 3,000 VAC at 50/60 Hz for 1 minute between the charging part and the case |
Noise, Vibration, and Shock Resistance
| Parameter | Specification |
|---|---|
| Noise Immunity | Square-wave noise immunity according to the selected power supply version |
| Vibration | 0.75 mm double amplitude at 10–55 Hz in each X, Y, and Z direction for 1 hour |
| Vibration Malfunction | 0.5 mm double amplitude at 10–55 Hz in each X, Y, and Z direction for 10 minutes |
| Shock | 300 m/s², approximately 30 G, in each X, Y, and Z direction for 3 times |
| Shock Malfunction | 100 m/s² in each X, Y, and Z direction for 3 times |
Relay Life
| Parameter | Specification |
|---|---|
| Mechanical Life | ≥ 10,000,000 operations |
| Electrical Life | ≥ 100,000 operations at 250 VAC, 5 A resistive load |
Environmental Specifications
| Parameter | Specification |
|---|---|
| Operating Temperature | −10 to 55°C, no freezing or condensation |
| Storage Temperature | −25 to 65°C, no freezing or condensation |
| Operating Humidity | 35–85% RH, no condensation |
| Storage Humidity | 35–85% RH, no condensation |
Certifications and Weight
| Parameter | AT8N | AT11DN | AT11EN |
|---|---|---|---|
| Certifications | CE, UKCA, cRUus, EAC | CE, UKCA, cRUus, EAC | CE, UKCA, cRUus, EAC |
| Approximate Unit Weight | 86.71 g | 85 g | 87.5 g |
| Approximate Packaged Weight | 134.12 g | 132.2 g | 134.7 g |
Note: Power consumption, contact configuration, and applicable electrical values depend on the selected model and power supply version. Refer to the corresponding part-number documentation for final verification.
Dimensions & Panel Mounting
The Autonics ATN Series is designed with a standard 48 × 48 mm front panel size for panel-mounted industrial control systems. Mechanical dimensions and panel cut-out requirements are provided below to assist with enclosure design and installation planning.
Timer Dimensions
| Dimension | Value |
|---|---|
| Front Panel Size | 48 × 48 mm |
| Front Panel Thickness | 6.5 mm |
| Overall Body Depth | 50 mm |
| Front Section Depth | 14.9 mm |
| Rear Section Length | 14.7 mm |
| Body Height | 44.8 mm |
Mounting Bracket Dimensions
| Dimension | Value |
|---|---|
| Bracket Width | 49.5 mm |
| Overall Bracket Width | 60.3 mm |
| Bracket Depth | 30.5 mm |
Panel Cut-out
For panel installation, prepare the panel according to the following dimensions.
| Parameter | Value |
|---|---|
| Panel Cut-out Size | 45 × 45 mm (+0.6 / 0 mm) |
| Minimum Horizontal Pitch | 65 mm |
| Minimum Vertical Pitch | 65 mm |
Dimensions are specified in millimetres (mm). For complete mechanical drawings and installation details, refer to the official Autonics documentation.
Model Selection and Ordering Information
The ATN Series model number identifies the timer plug type, output configuration, and power supply version.
Model Number Structure
AT [Plug Type] [Output] N – [Power Supply]
| Selection Parameter | Code | Description |
|---|---|---|
| Plug Type | 8 | 8-pin plug |
| Plug Type | 11 | 11-pin plug |
| Output Configuration | No code | Time Limit DPDT (2C), or Instantaneous SPDT (1C) + Time Limit SPDT (1C), depending on model |
| Output Configuration | D | Time Limit DPDT (2C) |
| Output Configuration | E | Instantaneous SPDT (1C) + Time Limit SPDT (1C) |
| Power Supply | No suffix | 100–240 VAC, 50/60 Hz or 24–240 VDC |
| Power Supply | 1 | 12 VDC |
| Power Supply | 2 | 24 VAC, 50/60 Hz or 24 VDC |
Selection Summary
| Selection Item | Available Options |
|---|---|
| Product Type | Analog timer |
| Plug Type | 8-pin or 11-pin |
| Output Configuration | Time Limit DPDT (2C), or Instantaneous SPDT (1C) + Time Limit SPDT (1C) |
| Power Supply | 100–240 VAC / 24–240 VDC, 24 VAC / 24 VDC, or 12 VDC |
Note: Not all combinations of plug type, output configuration, and power supply are available. Select the required part number according to the official Autonics product documentation.
Optional Accessories
Compatible controller sockets are available separately and should be selected according to the timer plug type.
| Timer Plug Type | Compatible Socket Models |
|---|---|
| 8-Pin Models | PG-08, PS-08(N) |
| 11-Pin Models | PG-11, PS-11(N) |
Note: Controller sockets are sold separately and are not included with the standard product package. Select the appropriate socket based on the timer model and plug type.
Package Contents
The standard package includes:
- ATN Series analog timer with mounting bracket
- Instruction manual
Documents
Additional Information
Power Supply: |
100-240 VAC, 24-240 VDC, 24 VAC, 12 VDC |
Output Operation Modes: |
6 Modes |
Time Setting Range: |
0.05 seconds to 100 hours |
Control Output: |
DPDT or SPDT Relay |
Vibration Resistance: |
0.75 mm double amplitude at 10-55 Hz |
Shock Resistance: |
300 m/s² |
Insulation Resistance: |
≥ 100 MΩ |
Dielectric Strength: |
2,000 VAC for 1 minute |
Related Products
Related Products
Compact Multi-Function Analog Timers ATS Series
Autonics
Multi-Function Analog Timer - AT8N
Autonics
Multi-Function Analog Timer - AT11DN
Autonics
Miniature Analog Timers ATM Series
Autonics
Simple Operation Analog Timers ATE8 Series
Autonics