Loop Powered Isolator Current Input - DAT 511
- DAT 511
- 60.00 Grams
Datexel Loop Powered Isolator Current Input DAT 511
High Accuracy, Stable Performance, Italian Made
The transmitter DAT 511 is a passive 0÷20 mA current loop isolator.
The input current, variable from 0 up to 20 mA, is converted in an output current of the same value but keeping a galvanic isolation from the input circuit.
The converter is a passive isolator: this means that the device employs the measurement signal to power itself, so it does not require any external power supply.
The DAT 511 is in compliance with the standard 89/336/EEC on the Electromagnetic Compatibility.
It is housed in a plastic enclosure of 17 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards
The advantages for DAT 511:
- 0÷20 mA isolated conversion
- No external supply required
- 3000 Vac galvanic isolation
- Good accuracy and performance stability
- EMC compliant – CE mark
- Suitable for DIN rail mounting in compliance with EN 50022 and EN-50035
Input for DAT 511
- Signal type (*) Current: 0 ÷ 20 mA
- Maximum input signal 50 mA
- Voltage drop 3 Vdc max.
Output for DAT 511
- Signal type Current: 0 ÷ 20 mA
- Load resistance (Rload) from 0 up to 700 ohm
- Transmission error ± 0.25 % of f.s.
- Load resistance influence ± 0.085 % of f.s./100 Ω
- Thermal drift 0.02 % of f.s./°C
- Response time 20 ms
- Isolation voltage 3000 Vac, 50 Hz, 1 min
- Electromagnetic Compatibility (EMC)(for industrial environments) Immunity: EN 61000-6-2; Emission: EN 61000-6-4.
- Operating Temperature 0 ÷ 55 °C
- Storage Temperature -40 ÷ 85 °C
- Humidity (not condensed) 0 ÷ 90%
- Weight about 60 g.
- Oil and gas
- Brick manufacturing
- Heat Exchangers
- Industrial Processes
- Heating/cooling systems
“DAT200, DAT500 SERIES”: signal transmitters and converters, galvanic isolators
The transmitters and converters of the DAT200 series can accept on their input signal coming from potentiometer sensors (DAT205) or voltage and current signals (DAT207) The series is composed of:
Not isolated transmitter for potentiometer input from 1 Kohm up to 10 Kohm. Powered from 4÷20 mA current loop (DAT205 2W).
Not isolated converter for potentiometer input from 1 Kohm up to 10 Kohm. Fixed range (DAT205 3W).
Not isolated transmitter for mV, V, mA input. Fixed range. Powered from 4÷20 mA current loop (DAT207 2W).
Not isolated converter for mV, V, mA input. Fixed range. (DAT207 3W).
Self-powered, 3000 Vac isolated converter for 0÷20 mA current loop. (DAT511).
Self-powered, 1500 Vac isolated converter for 0÷20 mA current loop. Hart compatible (DAT511-H)
Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.
The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.
DocumentsTo View Data Sheet for Datexel Loop Powered Isolator Current Input DAT 511 Please Click Here
Loop Powered Isolator Current Input DAT 511
0-20 mA or 4-20mA
0-20 mA or 4-20mA
Operative -4°F +158°F -20°C +70°C Temperature Storage Temperature -40°F +170°F -40°C +85°C
(none condensing) 0-90%
W 11/16" L 2 1/2" H 2 1/2" 17 mm X 62 mm x 64mm
2 oz 60 g
For industrial environments. Immunity: EN 61000-6-2. Emission: EN 61000-6-4