Digital Clamp Meter, 57mm jaw opening capability - CA-1000D

(No reviews yet) Write a Review
700.00 Grams
Minimum Purchase:
1 unit


Tecpel AC/DC Clamp Adapter Transmitter - CA-1000D

1000A AC or DC Current Clamp, lightweight design, CE Mark - Accurate and Reliable

In electrical and electronic engineering, a current clamp or current probe is an electrical device with jaws that open to allow clamping around an electrical conductor. This allows the measurement of the current in a conductor without the need to make physical contact with it or to disconnect it for insertion through the probe.

CA-1000D from Tecpel is a clamp meter that allows your multimeter to measure electrical current up to 1000Amperes DC/AC, with a frequency response of up to 400MHz. When measuring current with this clamp. There is no need to break a circuit or to affect the isolation.

Current Clamp CA-1000D from Tecpel comes with the following properties:

1000A AC or DC Current Clamp

  • Measure current without disconnecting circuit under test
  • Measure to 1000A DC or AC
  • Outputs 1mV per Amp, operates on 2V range of any DMM

Specifications for Current Clamp CA-1000D Tecpel

  • DC Current Range: 0-1000A±(1.5~3.5%+3A)
  • AC Current Range: 0-1000A±(1.5~3.5%+3A)


  • 0-1V rms or DC with>=1MΩ input impedance

Transfer Rate:

  • 1mV/1A, Overload Protection, 1200A for 60 seconds maximum.


  • Jaws Opening Capability: 57mm Conductor, 70 x 18 mm bus bars
  • Power Requirement: One 9V battery
  • Dimensions: 9.6"x3.9"x1.6" (244x100x40mm)


Brand Information

Tecpel Co. Ltd. has over 20 years of experience in the Test and Measurement market. They have set up over 50 country distributors worldwide. Some of their products have been branded by famous leaders in the market. About 60% of their customers are repeat customers. Tecpel imports products from Japan and carries out quality checks. Their products are exported to Europe mainly. If customers find a fault with the product, they will replace it with a new product within 2-3 days.

They are regarded as one of the leading Taiwanese manufactures of high quality test and measurements. Their product lines include power supplies, oscilloscopes, electronics & electrical meters and testers. Tecpel’s quality products have been accepted by some well-known international customers. The confidence they have in their products is reflected in their one-year warranty and by their flat-rate service policy through 3-5 years.



To View Data Sheet for Tecpel AC/DC Clamp Adapter Transmitter - CA-1000D Please Click Here
View AllClose

Warranty Information

One-Year Warranty
View AllClose

Additional Information

DC Current Range:
0-1000A ± (1.5~3.5%+3A).
AC Current Range:
0-1V RMS or DC with>=1MΩ input impedance.
Transfer Rate:
Overload Protection:
1200A for 60 seconds maximum.
Jaws Opening Capability:
57mm Conductor, 70 x 18 mm bus bars.
Power Requirement:
One 9V battery.
9.6"x3.9"x1.6" (244x100x40mm).
View AllClose