DATEXEL Temperature Transmitters Transmitter For Explosive & Safe Environment DAT1015ISHT

Write a Review
500.00 Grams
Minimum Purchase:
1 unit
Calculated at Checkout


DAT1015ISHT from Datexel is a High Temperature IS Certified Head Mounted Temperature Transmitter that is certified to a T4 rating meaning that the temperature rating is 185°f (85°C). The DAT1015ISHT can accept Thermocouples, RTD's, mV's, Potentiometers and resistance Inputs and provides a 4-20mA (2 wire) output the output can be inverted to provide a 20-4mA output. Also, the burnt-out failure can be set to drive to full-scale or low scale.

The DAT1015ISHT "in head Mounted Temperature Transmitter" is PC Programmable and the sensor, range, zeros, and linearization are programmable with the Prodat software, available from DATEXEL. The RTD and resistance input has the added feature of selecting 3 or 4 wire for compensating long cable runs improving accuracy.

DAT1015ISHT from Datexel comes with the following features:

  • - PROTECTION MODE: II 1 G Ex ia IIC T6, T5, T4 Ga certified in according to the Directive ATEX 2014/34/EU.
  • Applicable in zones with explosion risk (ZONE 0).
  • Configurable input for RTD, mV, Tc, Resistance, and Potentiometer.
  • 4 ÷ 20 mA configurable output on current loop.
  • Configurable by Personal Computer, on-field reconfigurable.
  • High accuracy.
  • EMC compliant with CE mark.
  • Suitable for DIN B in-head mounting.

Brand Information

Datexel products are made to the very highest standards and all products carry the CE mark, and since March 2015 all slim-line products and DAT3000 modules carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safe environments. In July 2006, Datexel confirmed its products to the RoHS Directive Standard (2002/95/EC) which imposes restrictions on the use of dangerous substances for the manufacturing of electric and electronic equipment. Situated in Jupiter, Florida USA.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

Input signal type:
TC, RTD, Potentiometer, Voltage, Resistance.
Input calibration:
RTD > of ±0.1% f.s. or ±0.2°C. Low res. > of ±0.1% f.s. or ±0.15 Ω. High res. > of ±0.2% f.s. or ±1 Ω. TC, mV > of ±0.1% f.s. or ±10 uV.
Input impedance:
mV >= 10 MΩ.
Output type DC:
Min. 4mA. Max. 20mA.
Output type Reverse Current:
Min. 20mA. Max. 4mA.
Output calibration:
Current ± 7 uA.
Tc ± 0.2 % f.s. RTD ± 0.1 % f.s.
Line resistance influence:
TC, mV <=0.8 uV/Ohm. RTD 3 wires 0.05%/Ω (50Ω balanced max.). RTD 4 wires 0.005%/ Ω (100Ω balanced max.).
RTD excitation current:
Typical 0.350 mA.
CJC comp.:
± 0.5°C.
Thermal drift:
Full-scale ± 0.01% / °C. CJC ± 0.01% / °C.
Burnout values:
Max. value about 22.5 mA. Min. value about 3.6 mA.
Response time (10÷ 90%):
About 400 ms.
Power supply:
Power supply voltage 11…30 Vdc. Reverse polarity protection 60 Vdc max.
Temp. and humidity:
Operative temperature -20°C …+70°C. 'HT' vers: -20°C…+85°C. Storage temperature -40°C …+85°C. Humidity (not condensed) 0 …90 %.
Material PC + ABS V0. Mounting DIN B head or bigger. Weight about 50 g. Dimensions Ø= 43 mm ; H = 24 mm
EMC (for industrial environments):
Immunity EN 61000-6-2. Emission EN 61000-6-4.
View AllClose