Head Mount Temperature Transmitter with RTD Input, Current Output, Intrinsically Safe - DAT 1010 IS

(No reviews yet) Write a Review
DAT 1010 IS
DAT1010 IS
50.00 Grams
Minimum Purchase:
1 unit


Datexel Temperature Transmitter RTD Input, Current Output - DAT 1010 IS

Multiple Input, highly Accurate, Current Output, Made in Italy

The transmitter DAT 1010 IS is able to execute many functions such as: measure and linearisation of the temperature characteristic of RTDs sensors, conversion of a linear resistance variation, conversion of a voltage signal even coming from a potentiometer connected on its input. The measured values are converted in a 4÷20 mA current signal. The device guarantees high accuracy and performances stability both in time and in temperature.

The programming of the DAT 1010 IS is made by a Personal Computer using the software PROSOFT, developed by DATEXEL, that runs under the operative

system "WindowsTM ". By use of PROSOFT, it is possible to configure the transmitter to interface it with the most used sensors.

In case of sensors with a no-standard output characteristic, it is possible to execute, via software, a "Custom" linearisation (per step) to obtain an output linearise signal.

For Resistance and RTDs sensors it is possible to program the cable compensation with 3 or 4 wires.

It is possible to set the minimum and maximum values of input and output ranges in any point of the scale, keeping the minimum span shown in the table below.

Moreover, it is available the option of alarm for signal interruption (burn-out) that allows to set the output value as high or low out of scale.

It is housed in a self-extinguish plastic enclosure suitable for DIN B in-head mounting.


The advantages for DAT1010IS:

  • PROTECTION MODE: II 1 G Ex ia IIC T6, T5, T4 Ga certified in according to the Directive ATEX 014/34/EU
  • Applicable in zones with explosion risk (ZONE 0)
  • Configurable input for RTD, mV, Resistance and Potentiometer
  • 4 ÷ 20 mA configurable output on current loop
  • Configurable by Personal Computer, on-field reconfigurable
  • High accuracy
  • EMC compliant – CE mark
  • Suitable for DIN B in-head mounting

Input for this Converter is:

  • RTD (*) 2,3,4 wires:

Pt100 -200°C 850°C 50°C

Pt1000 -200°C 200°C 50°C

Ni100 -60°C 180°C 50°C

Ni1000 -60°C 150°C 50°C

  • Voltage:

mV -100mV +700mV 2 mV

  • Potentiometer:

(Nominal value) 0 W 200 W 10%

200 W 500 W 10%

0.5 KW 2 KW 10%

  • RES. 2,3,4 wires:

Low 0 W 300 W 10 W

High 0 W 2000 W 200 W

Output for DAT4531B Converter is:

  • Direct current: 4 mA 20 mA 4 mA
  • Reverse current: 20 mA 4 mA 4 mA

Response time

Response time for this converter is (10÷ 90%) about 400 ms

Power supply

Power supply voltage is 11 .. 30 Vdc and the Reverse polarity protection is equal to 60 Vdc max

Temperature & humidity

  • Operative temperature -20°C .. +70°C
  • Storage temperature -40°C .. +85°C
  • Humidity (not condensed) 0 .. 90 %


  • Furnace
  • Oil and gas
  • Brick manufacturing
  • Heat Exchangers
  • Industrial Processes
  • Heating/cooling systems

Brand Information

Intrinsically safe smart series ATEX94/9/EC

 The Intrinsically Safe SMART Series devices, type-approved according to Directive ATEX94/9/EC, are subdivided into three different product categories: universal input transmitters to be installed in a potentially explosive atmosphere (Zone 0) codes:

DAT 2015 IS, DAT 4035 IS, DAT 1010 IS, DAT 1015 IS, DAT 1065 IS.

Converters / Barriers for universal input or current loop (0-4…..20 mA), suitable for installation in safe zone for connections towards zone 0. codes:

DAT 4235 IS in the following versions:

A= Converter/Barrier, B= Double trip amplifier,
C= Converter/Barrier + Double trip amplifier.

DAT 5030 IS in the following versions:

A= Single-channel barrier, AH= HART transparent single-channel

barrier, B= Double-channel barrier, BH= HART transparent

double-channel barrier

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.


Data Sheet

To View Data Sheet for Datexel Temperature Transmitter RTD Input, Current Output DAT1010 IS Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

Input signal type:
RTD, Potentiometer, Voltage, Resistance.
Input calibration:
RTD > of ±0.1% f.s. or ±0.2°C. Low res. > of ±0.1% f.s. or ±0.15 Ω. High res. > of ±0.2% f.s. or ±1 Ω. mV > of ±0.1% f.s. or ±18 uV.
Input impedance:
mV >= 10 MΩ.
Output type DC:
Min. 4mA. Max. 20mA.
Output type Reverse Current:
Min. 20mA. Max. 4mA.
Output calibration:
Current ± 7 uA.
RTD ± 0.1 % f.s.
Line resistance influence:
mV <=0.8 uV/Ohm. RTD 3 wires 0.05%/Ω (50Ω balanced max.). RTD 4 wires 0.005%/ Ω (100Ω balanced max.).
RTD excitation current:
Typical 0.350 mA.
Thermal drift:
0.01 % of f.s./°C.
Burnout values:
Max. value about 22.5 mA. Min. value about 3.6 mA.
Response time (10÷ 90%):
About 400 ms.
Power supply:
Power supply voltage 10…32 Vdc. Reverse polarity protection 60 Vdc max.
Isolation voltage:
Input – Power supply 1500 Vac, 50 Hz,1 min.
Temp. and humidity:
Operative temperature -20°C …+70°C, 'HT' vers: -20°C …+85°C. Storage temperature -40°C …+85°C Humidity (not condensed) 0 .. 90 %
Material PC + ABS V0. Mounting DIN B head or bigger. Weight about 50 g. Dimensions Ø= 43 mm ; H = 24 mm
EMC (for industrial environments):
Immunity EN 61000-6-2. Emission EN 61000-6-4.
View AllClose