DATEXEL Temperature Transmitter Device Din Rail Temperature Transmitters DAT8050

Write a Review
500.00 Grams
Minimum Purchase:
1 unit
Calculated at Checkout


DAT8050 from Datexel is a 4 Digit LED loop-powered indicator that accepts an input and a power supply from a 4-20 mA current loop signal, no external power supply is needed. The display can be adjusted to have a span between -1999 and 9999 points, the Zero can be adjusted between -1999 and 9999 by buttons on the front panel. It is also possible to set the decimal point.

The DATEXEL DAT8050 is designed for mounting in a panel in accordance with DIN 43700 standard. It also has a function to freeze (HOLD) the display. The DATEXEL DAT8050 is In compliance with the directive CEE/336/89 on the Electromagnetic Compatibility.

When the measured current is lower than 3.8 mA, the display will show the message " Lo "; in the same way, when the current measured is higher than 20.2 mA, the display will show the message " Hi ". It is possible to apply the desired engineering unit using the adhesive labels supplied with the device.

The DATEXEL DAT8050 unit, developed, manufactured and tested in strict accordance with the quality assurance standard UNI EN ISO9001:2000, is In compliance with the 89/336/EEC directive on Electromagnetic Compatibility. It is housed in a strong plastic enclosure of 48 x 96 x 74 mm in accordance with the standard DIN43700.

DAT8050 from Datexel comes with the following features:

  • - 4÷20 mA loop-powered.
  • Voltage Drop-out < 5V.
  • High accuracy and linearity.
  • 0.52" LED display.
  • Visualization configurable on the front side.
  • Connections on removable screw terminals.
  • Compact case size (DIN 48 x 96 mm).
  • In compliance with EMC standards with CE mark.

Brand Information

Datexel products are made to the very highest standards and all products carry the CE mark, and since March 2015 all slim-line products and DAT3000 modules carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safe environments. In July 2006, Datexel confirmed its products to the RoHS Directive Standard (2002/95/EC) which imposes restrictions on the use of dangerous substances for the manufacturing of electric and electronic equipment. Situated in Jupiter, Florida USA.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

Input signal:
Voltage drop-out:
Limitation current:
Type of visualization:
4 digits LED.
Digit height:
Range of visualization:
Programmable on the front side, from "-1999" up to"9999", with decimal point setting.
Minimum measurable current:
3.8 mA (visualization "Lo" in case of lower measure).
Maximum measurable current:
20.2 mA (visualization "Hi" in case of higher measure).
Characteristics and Performance:
Reading Accuracy:
Better than ± 0.05 % of f.s. or ± 1 digit.
Response time:
Thermal drift:
100 ppm/°C.
Operating temperature:
-20 ÷ 60 °C.
Storage temperature:
-40 ÷ 85 °C.
Mechanical dimensions:
48 x 96 x 74 mm.
Maximum Altitude:
2000 m.
Category of installation:
Pollution degree:
Approx 100g.
Mechanical specifications:
Self-extinguishing plastic NORYL (UL94-V0).
IP code:
Wires with diameter 0.8÷2.1 mm2 /AWG 14-18.
Tightening torque:
0.8 Nm.
On panel.
Electromagnetic Compatibility ( EMC, for industrial environments ):
Immunity: EN 61000-6-2 Emission: EN 61000-6-4
View AllClose