DATEXEL Temperature Transmitter Device Din Rail Temperature Transmitters DAT5020

Write a Review
500.00 Grams
Minimum Purchase:
1 unit
Calculated at Checkout
  • DAT5020 Temperature Transmitter (DAT5020)
  • DAT5020 Temperature Transmitter (DAT5020)


DAT5020 from Datexel is a Bipolar voltage Signal converter that can accept +/- 5V, +/-10V, mV, mA, Potentiometers and can converter these signals into an isolated +/- 5V, 10V, Voltage or Current output. The DAT5020 has a 3-way isolation between the input, output and power supply. The DAT5020 is a DIN Rail mount and DIP Switch programmable. It is accurate to 0.1% full scale and has less than 0.01%/°f thermal drift.

The DAT5020 is programmable by PC based software which has been developed by DATEXEL to be user-friendly. For resistance and RTD's sensors, it is possible to program the cable compensation for 3 or 4 wires. It is possible to set the minimum and maximum values of the input and output range at any point of the scale, keeping the minimum span shown in the Data-sheet. Also, a high burn out alarm or low burn out alarm is selectable.

The DAT5020 is isolated between the input, output and power supply to 2000V, eliminates the effects of any ground loops and allows the use of the transmitter in heavy environmental conditions found in industrial applications. The DAT5020 is In compliance with the standard 89/336/CEE on the Electromagnetic Compatibility. It is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.

The DAT5020 is able to measure and linearize the standard thermocouples with internal cold junction compensation.

 DAT5020 from Datexel comes with the following features:

  • Input for voltage, current and potentiometer signal.
  • Input range configurable by DIP-switches.
  • Isolated power supply source for the passive current transmitter on input.
  • Voltage or current output.
  • Output values configurable by DIP-switches.
  • Galvanic isolation at 2000 Vac between input, power supply, and output.
  • Good accuracy and performance stability.
  • EMC compliant with CE mark.
  • DIN rail mounting in compliance with EN-50022 and EN-50035

Brand Information

Datexel products are made to the very highest standards and all products carry the CE mark, and since March 2015 all slim-line products and DAT3000 modules carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safe environments. In July 2006, Datexel confirmed its products to the RoHS Directive Standard (2002/95/EC) which imposes restrictions on the use of dangerous substances for the manufacturing of electric and electronic equipment. Situated in Jupiter, Florida USA.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

Signal type (configurable):
Current: 4 ÷ 20 mA, 0 ÷ 20 mA, Voltage: 0÷10 V, 0÷1 V, ± 5 V, ± 10 V, 0 ÷100 mV Potentiometer (nominal value) : from 1 KΩ up to 5 KΩ.
Maximum input signal:
30 Vdc or 50 mA.
Input impedance:
Voltage: >/= 1 MΩ, Current: ~ 50 Ω.
Auxiliary supply (Aux. supply ):
18 Vdc min @ 20 mA.
Signal type (configurable):
Current: 4 ÷ 20 mA, 0 ÷ 20 mA, Voltage: 0÷10 V, 0÷2 V, ± 5 V, ± 10 V, ± 1 V.
Maximum output signal:
15 Vdc or 30 mA.
Zero regulation:
± 5 % min.
Span regulation:
± 5 % min.
Load Resistor.nce (Rload):
Current output: /= 5 KΩ. Voltage output: >/= 5 KΩ.
Min 0mA. Max.20mA.
Min.0V. Max.10V.
Output resolution:
Calibration error:
± 0.1 % of f.s.
Linearity error (*):
± 0.15 % of f.s.
Thermal drift:
0.02 % of f.s./°C.
Response time (from 10 to 90 % of f.s.):
500 ms.
Power supply voltage (**):
18÷32 Vdc
Current consumption(***):
Current output: 110 mA max. Voltage output: 80 mA max.
Electromagnetic Compatibility (EMC) ( for industrial environment ):
Immunity: EN 61000-6-2; Emission: EN 61000-6-4.
Isolation voltage:
2000 Vac, 50 Hz, 1 min.
Operating temperature:
-20 ÷ 60 °C.
Storage temperature:
-40 ÷ 85 °C.
Relative humidity (non cond.):
0 ÷ 90%.
Approx. 90g.
View AllClose