The DATEXEL DAT8050 is a LED 4 Digit LED loop powered indicator accepts an input and a power supply from a 4-20 mA current loop signal.
No external power supply is needed.
The display can be adjusted to have a span between -1999 and 9999 points, the Zero can be adjusted between -1999 and 9999 by buttons on the front panel. It is also possible to set the decimal point.
The DATEXEL DAT8050 is designed for mounting in a panel in accordance with DIN 43700 standard. It also has a function to freeze (HOLD) the display.
The DATEXEL DAT8050 is in compliance with the directive CEE/336/89 on the Electromagnetic Compatibility.
When the measured current is lower than 3.8 mA, the display will show the message " Lo "; in the same way, when the current measured is higher than 20.2 mA, the display will show the message " Hi ".
It is possible to apply the desired engineering unit using the adhesive labels supplied with the device.
The DATEXEL DAT8050 unit, developed, manufactured and tested in strict accordance with the quality assurance tandard UNI EN ISO9001:2000, is in compliance with the 89/336/EEC directive on the Electromagnetic Compatibility. It is housed in a strong plastic enclosure of 48 x 96 x 74 mm in accordance with the standard DIN43700.
4 Digit Display.
Less than 5 V Volt drop, 3 mA.
DIP Switch Configurable.
Between Input/Output/Power Supply 1500Vac.
For Industrial environments
Immunity EN 61000-6-2
Emission EN 6100-6-4
Dimensions W x H x T
3 3/4" x 1 7/8" x 2 1/2"
96 x 48 x 64 mm
Weight 3 oz 90 g
Operating Temperature -4°F +140°F -20°C +60°C
Storage Temperature -40°F +185°F-40°C +85°C
Humidity (non condensing) 0-90%
|Volt drop||Less than 5 V|
|Temperature rating:||Operative- 4°F +158°F - 10°C +60°C|
|Temperature Storage Temperature - 40°F +165°F - 40°C +80°C.|
|Humidity:||(none condensing) 0-90%.|
|Dimensions:||W 2 5/8" x 1 1/4" x 1 1/16" 67 mm X 32 mm x 27mm|
|Weight:||3 oz 100 g.|
|EMC.||For industrial environments.|
|Immunity: EN 61000-6-2.|
|Emission: EN 61000-6-4|
|D 0||Terminal 16 and 12