Temperature Transmitter DAT4035

Write a Review
SKU:
DAT4035
MPN:
DAT4035
Weight:
500.00 Grams
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
$283.00

Description

DAT4035 from Datexel is a DIN Rail mount signal transmitter with PC programmability. The input can be thermocouples, RTD, mA, V, mV, resistance and potentiometer. The DAT4035 will linearize the input and provide a 4-20mA output signal. It is accurate to 0.1% full scale and has less than 0.01%/°f thermal drift.
The DAT4035 is programmable by PC based software which has been developed by DATEXEL to be user-friendly.
For resistance and RTD's sensors, it is possible to program the cable compensation for 3 or 4 wires.
It is possible to set the minimum and maximum values of the input and output range at any point of the scale, keeping the minimum span shown in the Data-sheet. Also, a high burn out alarm or low burn out alarm is selectable.
The DAT4035 is isolated between the power supply, and the input/output to 2000V, eliminates the effects of any ground loops and allows the use of the transmitter in heavy environmental conditions found in industrial applications. The DAT4035 is In compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.
The DAT4035 is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards. It is able to measure and linearize the standard thermocouples with internal cold junction compensation.

DAT4035 from Datexel comes with the following features:

  • Configurable input for RTD, TC, mV, V, mA, Resistance and Potentiometer.
  • Galvanic isolation at 2000 Vac.
  • 4 ÷ 20 mA configurable output on the current loop.
  • Configurable by Personal Computer.
  • High accuracy.
  • On-field reconfigurable.
  • EMC compliant with CE mark.
  • Suitable for DIN rail mounting in compliance with EN-50022 and EN50035

Product Specification

Features

Range/Description

Input

  • Input type

TC, RTD, voltage, potentiometer, resistance, current (details in datasheet)

  • Input calibration

RTD > of ±0.1% f.s. or ±0.2°C. Low res. > of ±0.1% f.s. or ±0.15Ω.

High res. > of ±0.2% f.s. or ±1 Ω. mV, TC > of ±0.1% f.s. or ±18 uV.

Volt > of ±0.1% f.s. or ± 2 mV. mA > of ±0.1% f.s. or ± 6 uA.

  • Input impedance

TC, mV >= 10 M Ω.

Volt >= 1 M Ω.

Current ~ 50 Ω.

Output

  • Output type DC

Min: 4mA.

Max: 20mA.

  • Output type Reverse current

Min: 20mA.

Max: 4mA.

  • Output calibration

Current ± 7 uA.

  • Linearity

TC ± 0.2 % f.s.

RTD ± 0.1 % f.s.

  • Line resistance influence

TC, mV <=0.4 uV/ Ω.

RTD 3 wires 0.05%/ Ω (50 Ω balanced max.).

RTD 4 wires 0.005%/ Ω (100 Ω balanced max.)

  • RTD excitation current

Typical 0.350 mA.

  • CJC Comp.

± 0.5°C.

  • Thermal drift (1)

Full scale ± 0.01% / °C.

CJC ± 0.01% / °C.

  • Burnout values

Max. value about 22.5 mA Min. value about 3.6 mA

  • Response time (10÷ 90%)

About 400 ms.

Power supply

  • Supply voltage

10 …32 Vdc

  • Reverse polarity protection

60 Vdc max.

  • Isolation

Input – Power supply/Out 2000 Vac, 50 Hz,1 min.

Environmental Conditions

  • Operative Temperature

-40°C …+85°C.

  • Storage Temperature

-40°C…+85°C

  • Humidity (not condensed)

0 …90 %.

  • Maximum Altitude

2000 m.

  • Installation

Indoor.

  • Category of installation

II.

  • Pollution Degree

2.

Mechanical Specifications

  • Material

Self-extinguish plastic.

  • IP Code

IP20.

  • Wiring

Wires with diameter 0.8÷2.1 mm2 /AWG 14-18.

  • Tightening Torque

0.8 Nm.

  • Mounting

In compliance with DIN rail standard EN-50022 and EN-50035.

  • Weight

About 90 g.

EMC (for industrial environment)

  • Immunity

EN 61000-6-2.

  • Emission

EN 61000-6-4.

Brand Information

Datexel products are made to the very highest standards and all products carry the CE mark, and since March 2015 all slim-line products and DAT3000 modules carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safe environments. In July 2006, Datexel confirmed its products to the RoHS Directive Standard (2002/95/EC) which imposes restrictions on the use of dangerous substances for the manufacturing of electric and electronic equipment. Situated in Jupiter, Florida USA.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose