Temperature Transmitter DAT 3024

Write a Review
SKU:
DAT 3024
MPN:
DAT 3024
Weight:
500.00 Grams
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
$408.00

Description

DAT3024 from Datexel is a 4 channel Current or Voltage output module. The DAT3024 converters RS232 into 4-20mA, 0-10V, 1-5V, 2-10V. The DAT3024 Current or Voltage output is Isolated from the Power supply, and the RS232. The Slew rate is adjustable. The DAT3024 is also available in the RS485 Modbus format.

DAT3024 from Datexel comes with the following features:

  • Field-Bus remote data acquisition.
  • Modbus Slave device on RS-485
  • Modbus RTU/ Modbus ASCII protocol.
  • 4 channel output.
  • Outputs configurable as Voltage or Current.
  • Watch-Dog Alarm.
  • Remotely Configurable.
  • 2000 Vac 3-ways Galvanic Isolation.
  • High Accuracy.
  • UL / CE mark.
  • DIN rail mounting in compliance with EN-50022.

Product Specification

Features

Range/Description

Output (4 channels)

  • Current

Min: 0mA.

Max: 20mA.

  • Voltage

Min: 0V.

Max: 10V.

  • Output Accuracy

Current: ± 20 uA.

Voltage ± 10 mV.

  • Thermal drift
    Full Scale

± 0.01 %/°C.

  • Load resistance

Voltage ≥ 5 KΩ.

Current ≤ 500Ω.

  • Auxiliary voltage (4-channels)

> 12V @ 20mA.

  • Response time

Slew-rate analog output (with a dedicated setting for each channel)

  • Data transmission

Baud Rate 115.2 Kbps Max. distance 1.2 Km – 4000 ft.

Power supply

  • Power supply voltage

10 …30Vdc.

  • Reverse polarity protection

60 Vdc max.

  • Current consumption

100mA max.

Isolation

  • On all the ways

2000 Vac, 50 Hz, 1 min.

Environmental conditions

  • Operative temperature

-10°C …+60°C.

  • UL Operative temperature

-10°C…+40°C.

  • Storage temperature

-40°C…+85°C.

  • Humidity (not condensed)

0 …90 %.

  • Maximum altitude

2000m.

  • Installation

Indoor.

  • Category of installation

II.

  • Pollution Degree

2.

Mechanical specifications

  • Material

Self-extinguish plastic.

  • IP code

IP20.

  • Wiring

Wires with diameter 0.8÷2.1 mm2 /AWG 14-18

  • Tightening torque

0.5 Nm.

  • Mounting

In compliance with DIN rail standard EN-50022 and EN-50035

  • Weight

About 150g.

Certification (EMC)

  • Immunity

EN 61000-6-2.

  • Emission

EN 61000-6-4.

Certification UL

  • US standard

UL 61010-1.

  • Canadian standard

CSA C22.2 No 61010-1.

  • C CN

NRAQ/NRAQ7.

  • Typology

Open Type device.

  • Classification

Industrial Control Equipment

  • File no.

E352854

Brand Information

Datexel products are made to the very highest standards and all products carry the CE mark, and since March 2015 all slim-line products and DAT3000 modules carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safe environments. In July 2006, Datexel confirmed its products to the RoHS Directive Standard (2002/95/EC) which imposes restrictions on the use of dangerous substances for the manufacturing of electric and electronic equipment. Situated in Jupiter, Florida USA.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose