null
Autonics

Photoelectric Sensor BA Series, Diffuse Reflective, 2m, PNP Output - BA2M-DDT-P

(No reviews yet) Write a Review
SKU:
BA2M-DDT-P
Weight:
500.00 Grams

Sold Out

Description

Autonics BA2M-DDT-P Photoelectric Sensor

The Autonics BA2M-DDT-P is a diffuse reflective photoelectric sensor with a 2 m sensing distance. It uses an infrared LED light source with an 850 nm wavelength and supports detection of opaque and translucent materials. The sensor features a maximum response time of 1 ms, 12–24VDC power supply, Light ON operation mode, and PNP open collector control output.

Technical Specifications

Specification Value
Sensing type Diffuse reflective type
Sensing distance 2 m
Sensing target Opaque, Translucent material
Light source Infrared LED (850 nm)
Response time Max. 1 ms
Power voltage 12–24VDC ±10% (ripple P-P: max. 10%)
Current consumption Max. 15 mA
Sensitivity adjustment Sensitivity adjuster
Operation mode Light ON
Control output PNP open collector
Connection type Cable type (Ø3, 2 m)
Protection structure IP64
Ambient temperature -25 to 55°C
Storage temperature -25 to 70°C
Ambient humidity 35 to 85% RH
Storage humidity 35 to 85% RH

The specified temperature and humidity conditions apply to environments without freezing or condensation.

Frequently Asked Questions

What should be checked when selecting the BA2M-DDT-P for an existing control system?

The BA2M-DDT-P should be evaluated based on its electrical and connection requirements, including the 12–24VDC power supply range, PNP open collector control output, and cable connection type. These specifications should match the requirements of the control system where the sensor will be installed.

When would the sensitivity adjustment feature be relevant during product selection?

The BA2M-DDT-P includes a sensitivity adjuster, which allows the sensor sensitivity to be adjusted during setup. This feature should be considered when the installation requires adjustment of the sensor response according to the sensing conditions.

Documents

Autonics BA2M-DDT-P Photoelectric Sensor datasheet

View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Sensing type:
Diffuse reflective type
Sensing distance:
2m
Sensing target:
Opaque, Translucent material
Light source:
Infrared LED(850nm)
Response time:
Max. 1ms
Power supply:
12-24VDC ±10%(ripple P-P: max. 10%)
Current consumption:
Max. 15mA
Sensitivity adjustment:
Sensitivity adjuster
Operation mode:
Light ON
Control output:
PNP open collector
Connection type:
Cable type(Ø3, 2m)
Environment_Ambient illumination:
Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination)
Environment_Ambient temperature:
-25 to 55℃, storage: -25 to 70℃
Protection structure:
IP64
Environment_Ambient humidity:
35 to 85% RH, storage: 35 to 85% RH
Hysteresis(distance):
Max. 20% at sensing distance
Material:
Case: Acrylonitrile butadiene styrene, Sensing part: Polycarbonate, Indicator: Polycarbonate, Adjuster: IXEF
View AllClose

Related Products

Related Products