Moisture Meter(TECPEL 590)

Write a Review
150.00 Grams
Minimum Purchase:
1 unit
Calculated at Checkout
  • woods Moisture Meter (TMM-590)
  • woods Moisture Meter (TMM-590)


Moisture meters are used to measure the percentage of water in a given substance. This information can be used to determine if the material is ready for use, unexpectedly wet or dry, or otherwise in need of further inspection. Wood and paper products are very sensitive to their moisture content.

TMM-590 from Tecpel is an all-purpose moisture meter to determine the moisture content in a substance. Its basic application is to determine moisture content in wood or environment.

TMM-590 from Tecpel comes with the following properties:

  • CE-Mark approval.
  • Portability and simplicity one-hand operation.
  • According to EN50081-1(97).
  • According to EN50082-1(97).
  • Automatic power shut off for maximum battery life.
  • Jack socket for pin extension leads.
  • Three lights to indicate moisture content in wood; Green:  "air, dry” normal conditions; Yellow: Slightly in excess of normal; Red: Excess moisture.
  • The measuring principle is electrical resistance.
  • Valox housing to withstand accidental drops.
  • WITH Soft carrying case.
  • Applications: Indoor Outdoor Furniture, Environment studies.

Product Specification



  • Display

3 LEDs and 3 1/2digit liquid crystal display (LCD).

  • Range

8%~28% (Reading above 28 indicate increasing levels of high moisture are not percent moisture content).

  • Accuracy         

+/- 2% from 8% to 28%.

Stated accuracy at 23 °C, +/- 5 °C, < 75% relative humidity.

  • Low battery indication

The "battery indication" is displayed when the battery voltage drops below the
operating level.

  • Operating environment

0°C to 40°C, 15 to 80% R.H.

  • Storage environment

-20°C to 60°C, 0 to 80% R.H. with battery removed from meter.

  • Dimensions

193mm(H) x 44mm(W) x 40mm(D).

  • Weight

5.8 oz (165g).

  • Weight

Approx. 150g including battery (1.5VX4pcs AAA size).

  • Temperature compensation

From 0 - 40 °C.

Brand Information

Tecpel Co. Ltd. has over 20 years of experience in the Test and Measurement market. They have set up over 50 country distributors worldwide. Some of their products have been branded by famous leaders in the market. About 60% of their customers are repeat customers. Tecpel imports products from Japan and carries out quality checks. Their products are exported to Europe mainly. If customers find a fault with the product, they will replace it with a new product within 2-3 days.

They are regarded as one of the leading Taiwanese manufactures of high quality test and measurements. Their product lines include power supplies, oscilloscopes, electronics & electrical meters and testers. Tecpel’s quality products have been accepted by some well-known international customers. The confidence they have in their products is reflected in their one-year warranty and by their flat-rate service policy through 3-5 years.


Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose