DPM-041 Digital Clamp Power meter

Write a Review
500.00 Grams
Minimum Purchase:
1 unit
Calculated at Checkout
  • DPM-041 Digital Clamp Power meter
  • DPM-041 Digital Clamp Power meter
  • DPM-041 Digital Clamp Power meter


In electrical and electronic engineering, a current clamp or current probe is an electrical device with jaws that open to allow clamping around an electrical conductor. This allows the measurement of the current in a conductor without the need to make physical contact with it or to disconnect it for insertion through the probe.

DPM-041 from Tecpel is a digital AC 1000A True RMS clamp on meter.

DPM-041 from Tecpel comes with the following features:

  • Power measure of Active power (KW).
  • Reactive power (KVAR).
  • Apparent power (KVA).
  • Power Factor (PF). PF (cos O) for 3O4W, 3O3W, 1O2W, 1O3W.
  • Triple display: KW+V+ A easy to read.
  • AC current up to 1000A, AC voltage up to 600V.
  • INRUSH (100mS), HOLD and PEAK functions.
  • MAX and MIN recorded functions.
  • Auto power off (10 mins), Black-light.
  • Dimensions of conductor: O35mm.
  • EN61010-1 Approval. Over-Voltage Category III 1000.


Brand Information

Tecpel Co. Ltd. has over 20 years of experience in the Test and Measurement market. They have set up over 50 country distributors worldwide. Some of their products have been branded by famous leaders in the market. About 60% of their customers are repeat customers. Tecpel imports products from Japan and carries out quality checks. Their products are exported to Europe mainly. If customers find a fault with the product, they will replace it with a new product within 2-3 days.

They are regarded as one of the leading Taiwanese manufactures of high quality test and measurements. Their product lines include power supplies, oscilloscopes, electronics & electrical meters and testers. Tecpel’s quality products have been accepted by some well-known international customers. The confidence they have in their products is reflected in their one-year warranty and by their flat-rate service policy through 3-5 years.

View AllClose

Warranty Information

One-Year Warranty
View AllClose

Additional Information

• Range:
0.0 to 600.0A, 600A to 1000A.
• Resolution:
• Accuracy:
± (1.5%rdg+10dgts) on 50Hz to 60Hz. ± (3.5%rdg+10dgts) on 45Hz to 400Hz.
• AC Voltage (True RMS) Range/Resolution:
0.0 to 600.0V/0.1V.
• Accuracy:
± (1%rdg+5dgts) on 20Hz to 100Hz. ± (6%rdg+5dgts) on 100Hz to 400Hz.
• Power measurement accuracy:
To make sure measuring accuracy, clamp the jaw several times to align the contact surface in place to get the optimal measuring results before you take measurement. Single phase or three phase load with sine wave input at 50/60Hz.
• Effective measurement current range:
4 to 1000A.
• Effective measurement voltage range:
80 to 600V.
• Power factor resolution:
• Power factor accuracy:
± (3.0%rdg + 0.02) at 1.000 > PF ?0.500. ± (5.0%rdg + 0.02) at 0.500 > PF ?0.200. ± (10.0%rdg + 0.02) at 0.200 > PF ?0.000.
• Active power:
• Resolution:
• Apparent Power:
• Resolution:
• Freq. range:
20.0 to 400.0Hz.
• resolution:
• Accuracy:
± (0.5%rdg + 5dgts).
• Sensitivity:
Voltage >5V RMS. Current >5A RMS on 20Hz to 100Hz. Current >10A RMS on 100Hz to 400Hz.
View AllClose