Multi Measuring Instruments
MCL-800D+ Digital Clamp Tester with 80mm x 74mm CT
- SKU:
- MCL-800D
- Weight:
- 650.00 Grams
Description
MCL-800D+ Digital Clamp Tester with 80mm x 74mm CT
The MCL-800D+ Digital Clamp Tester is an AC leakage current and current measuring instrument with a large 80 × 74 mm CT window. It supports six measurement ranges from 20 mA to 1000 A, with a minimum resolution of 0.01 mA, allowing both low-level leakage current and higher AC current measurements using a single instrument.
The tester features automatic range selection, a 150 Hz low-pass filter for reducing the influence of higher-frequency components, and MAX Hold and Data Hold functions for capturing and retaining readings. Its digital display provides measurement results, while the automatic power-off function helps conserve battery power during inactivity.
The MCL-800D+ operates with three AAA batteries and is specified for circuits below AC 600 V, with an EN 61010 CAT III 300 V installation category rating.
Accuracy Specifications
Accuracy conditions: 23℃ ±5℃, 80%RH or less (50/60Hz)
| Function | Range / Resolution | Accuracy | Maximum Input / Protection |
|---|---|---|---|
| AC Current (50/60 Hz) | 20 mA / 0.01 mA | ±2.0% rdg ± 5 dgt | Not specified |
| 200 mA / 0.1 mA | ±2.0% rdg ± 5 dgt | ||
| 2 A / 1 mA | ±2.0% rdg ± 5 dgt | ||
| 20 A / 10 mA | ±2.0% rdg ± 5 dgt | ||
| 200 A / 0.1 A | ±2.0% rdg ± 5 dgt | ||
| 1000 A / 1 A | ±2.0% rdg ± 5 dgt |
Key Features –MCL-800D+ Digital Clamp Tester with 80mm x 74mm CT
- AC Leakage and Current Measurement: Six measurement ranges from 20mA to 1000A, with a minimum resolution of 0.01mA.
- Large CT Window: 80mm × 74mm opening for accommodating conductors within the specified dimensions.
- Measurement Accuracy: ±2.0% of reading ±5 digits at 50/60Hz under specified reference conditions.
- 150Hz Low-Pass Filter: Reduces the influence of frequency components above 150Hz on measurements.
- Automatic Range Selection and Hold Functions: Automatically selects the measurement range and supports MAX Hold and Data Hold for retaining readings.
Documents
Catalog: e-ca_MCL-800D+.pdf
Instruction Manual: e-ma-MCL-800D+ series.pdf
Additional Information
Measuring method: |
Dual slope integration mode |
Accuracy: |
±3% of full scale(50/60Hz) |
Filter function: |
Low pass filter : 150Hz |
Measurement range: |
AC20mA/200mA/2A/20A/200A/1000A/Auto |
Max Memory function: |
"Max" mark on LCD with maximum value |
Auto power function: |
It power-off approximately 10-minutes after final operation. || This function will be disabled during MAX-hold/ Bluetooth is on. |
Over range indication: |
Only the manual ranges are displayed up to 110% of the setting range (Excluding 1000A range). "OL" mark on LCD |
Data hold indication: |
"DH" mark on LCD with data hold value |
Low battery indication: |
"Battery" icon on LCD |
Sampling rate: |
2 times/sec |
Storage temperature: |
-10℃ to 60℃, 80%RH max. (Without condensation ) |
Power supply: |
1.5V (AM-4, LR03 or AAA)×3 |
Dimension: |
138(W)×237(H)×46(D)mm |
Accessories: |
Hard carrying case:1 || Instruction manual:1 || Batteries:3 |
Jaw opening capability: |
80mm x 74mm |
Withstanding Voltage: |
AC 3700V 1 minute max. (Between the core of CT and outer case) |
Limitation of circuit voltage: |
Less than AC 600V (EN61010 Installation category CAT III 300V) |
Related Products
Related Products
M-1141X Leakage Current Clamp Tester with Bluetooth
Multi Measuring Instruments
MIS-D Digital Insulation Resistance Tester (CE)
Multi Measuring Instruments
M-280 AC/DC Mini Digital Clamp Tester (CE)
Multi Measuring Instruments
M-100+ Mini AC Leakage Current Clamp Tester
Multi Measuring Instruments
M-102+ Mini AC Leakage Current Clamp Tester
Multi Measuring Instruments