Name: M-730X AC/DC Clamp Milliammeter (CE)
Brand: Multi Measuring Instruments
SKU: M-730X
Availability: OutOfStock

M-730X AC/DC Clamp Milliammeter (CE)

(No reviews yet) Write a Review

SKU:

M-730X

Weight:

280.00 Grams

Description
Additional Information

Description

M-730X AC/DC Clamp Milliammeter (CE)

The M-730X AC/DC Clamp Milliammeter (CE) is a leakage current measuring instrument designed for low-current measurement in AC and DC electrical circuits. It provides DC measurement ranges of 100 mA and 1000 mA, along with AC ranges of 100 mA, 1000 mA, and 10 A at 45–65 Hz.

The instrument uses a separate CTP-30DC clamp sensor with a 30 mm jaw opening and provides 0.01 mA resolution on its 100 mA ranges. It supports DC current measurements in 4–20 mA control circuits and sleeping current measurements in automotive electronic circuits. A DC analog output of 100 mV full scale per range enables connection to compatible recording equipment.

The M-730X also features an integrated Bluetooth module, manual zero adjustment for DC measurements, data hold, and automatic power-off. Its specified safety ratings are CAT II 600 V and CAT III 300 V, with a maximum circuit voltage limitation of AC/DC 600 V.

Accuracy Specifications

Conditions: 23°C ± 5°C, less than 85% RH.

Function	Range	Measuring Range	Resolution	Accuracy
DC Current (DCA)	100 mA	0.1 to ±99.99 mA	0.01 mA	±1% rdg ± 10 dgt
	1000 mA	1 to ±300 mA	0.1 mA	±1% rdg ± 10 dgt
		±300.1 to ±700 mA	0.1 mA	±2% rdg ± 10 dgt
		±700.1 to ±999.9 mA	0.1 mA	±3% rdg ± 10 dgt
AC Current (ACA), 50/60 Hz	100 mA	0 to 99.99 mA	0.01 mA	±2% rdg ± 10 dgt
	1000 mA	0 to 999.9 mA	0.1 mA	±2% rdg ± 10 dgt
	10 A	0 to 9.999 A	0.001 A	±1% rdg ± 10 dgt

Additional Accuracy Conditions

Parameter	Specification
Influence of terrestrial magnetism	Less than ±2.0 mA
Influence of magnetization	Less than ±2.0 mA by DC 1.5 A on/off
Influence of CT opening and closing	Less than ±1.0 mA
Maximum DC input current	DC 1.5 A
Maximum AC input current	AC 20 A

Key Features –M-730X AC/DC Clamp Milliammeter (CE)

AC/DC leakage current measurement with 0.01 mA resolution on the 100 mA range.
Measurement ranges: DC 100 mA/1000 mA and AC 100 mA/1000 mA/10 A.
30 mm clamp opening with separate CTP-30DC current transformer.
DC analog output: 100 mV full scale on each measurement range.
Integrated Bluetooth module, as specified in the supplied product information.

View AllClose

Additional Information

Measuring function:	AC/DC leakage current
AC Conversion:	Average sensing rms reading
Accuracy:	See accuracy specifications in description tab
Display:	Max. 2000 count on LCD with annunciators
Current Consumption:	Approx. 9mA (Approx. 200 hours continuous)
Option:	Cable for recorder
Jaw opening capability:	30mmφ
Over range indication:	"OL" mark on LCD
Data hold indication:	"DH" mark on LCD
Sampling rate:	1 time/sec. for DC and 6 times/sec. for AC
Withstanding Voltage:	AC 3700V/1 minute between CT and outer case
Operating Temperature:	0～50℃, < 85%RH (without condensation)
Storage Temperature:	-10～60℃, < 70%RH (without condensation)
Low battery indication:	"B" mark on LCD
Auto power off:	Approx. 10 minutes after power on and can absolve this function by switch
Power supply:	LR6, AM-3 or AA size battery×4
Size:	Main unit:78(W)×155(H)×32(D)mm, Approx. 280g 33(W)×170(H)×24(D)mm CT (CTP-30DC):1.2m lead, Approx. 165g
Accessories:	Carrying case, Batteries, Instruction manual
Measuring range:	DC 100mA/1000mA, AC 100mA/1000mA/10A (45Hz-65Hz)
Zero adjustment:	For DC current range by "0 ADJ" switch
Signal Output:	DC 100mV full scale to each range (Output impedance: less than 10kΩ)
A/D Conversion:	Dual slope integration method