Isolated Module Modbus RTU Master with Micro SD Ram Data logging - DAT9000-DL-2.0

(No reviews yet) Write a Review
DAT9000 DL-2.0
160.00 Grams


Datexel Isolated Module Modbus RTU Master with Micro SD Ram Data logging - DAT9000-DL-2.0

Remotely programmable, serial interface RS-485 Modbus RTU Master, EMC compliance – CE mark, DIN rail mounting - High Quality

The device DAT9000DL is an Intelligent unit able to control a network of slave Modbus RTU devices connected on serial line RS-485 Master or Modbus TCP through the Ethernet interface executing the reading and writing of the field values and performing the logical and mathematical functions necessary for the system working, managing up to 10 task of recording memorized on files saved on the SD card memory.

By means of the Ethernet interface or the RS-485 “SLAVE” or uUSB ports it is possible to read and write, in real time, the internal registers value. By Ethernet it is possible to get access to the files saved on the SD card memory when the Data-Logger function is active.

The supplied CVPROG cable allows you to configure / program the device without using an external power supply.

Moreover, by means of the Ethernet interface, or by the RS-485 “SLAVE” or uUSB ports it is possible to:

- Programming of the Control Logic

- Monitor, request of data, programming in real time the Intelligent Unit

- Direct programming and request of data from the Slave devices connected to the RS-485 Master.

The device DAT9000DL is configurable by the software DEV9K 2.0 and successive versions developed by DATEXEL and running under Windows.

The device DAT9000DL realizes a full electrical isolation between the lines, introducing a valid protection against the effects of all ground loops eventually existing in industrial applications.

LED signaling of Ethernet activity and data Rx-Tx flow on the serial line allows a direct monitoring of the system functionality.

The connection is made by removable screw-terminals (supply and RS-485) and RJ45 plug (Ethernet).

The device is housed in a rough self-extinguishing plastic enclosure which, thanks to its thin profile of 22.5 mm only, allows a high density mounting on EN50022 standard DIN rail.

The advantages and features for Datexel Isolated Module DAT9000-DL-2.0

  • N.1 serial interface RS-485 Modbus RTU Master
  • N.1 serial interface RS-485/uUSB Modbus RTU Slave
  • N.1 slot for SD card
  • Interface Ethernet 10/100 Base-T, Modbus TCP Client/Server
  • Master both on RS-485 (Modbus RTU) and on Ethernet (Modbus TCP)
  • Programming software with "flow chart" structure
  • Remotely programmable
  • Connection by removable screw-terminals
  • Programmable without external sources via uUSB and CVPROG cable
  • LED signaling for Link/Act Ethernet, serial RX-TX, power supply
  • Galvanic Isolation on all the ways
  • EMC compliance – CE mark
  • Suitable for DIN rail mounting in compliance with EN-50022 standard

Network interface Ethernet 10/100Base-T

  • Protocol Modbus TCP
  • IP Table size max 8 devices (IP)
  • Socket Modbus TCP 16 (port 502)
  • Socket HTTP 3 (port 80)

RS485 Interface

  • Baud-rate up to 115.2 Kbps
  • Max. distance (1) 1,2 Km @ 115.2 Kbps
  • Protocol Modbus RTU
  • Number of modules in multipoint up to 32

SD card and datalogger

  • Type microSD (SDHC)
  • Memory size Up to 32 GB
  • Format FAT16 or FAT32
  • N° Logging task up to 10
  • Min. schedule rate 10 seconds

Power supply

  • 10 ÷ 30 Vdc
  • Current consumption 45 mA typ. @ 24Vdc (standby) 100 mA max


  • Power supply / Ethernet 1500 Vac, 50 Hz, 1 min.
  • Power supply / RS485 1500 Vac, 50 Hz, 1 min.
  • Ethernet / RS485 1500 Vac, 50 Hz, 1 min.


  • Ethernet RJ-45 (on terminals side)
  • uSB uSB micro-B (up front)
  • RS-485 / Supply /In / Out Removable screw terminals

Environmental Conditions

  • Operative temperature -20 ÷ +60 °C
  • Storage temperature -40 ÷ +85 °C
  • Relative humidity (not cond.) 0 ÷ 90 %
  • Maximum Altitude 2000 m
  • Installation Indoor
  • Category of installation b
  • Pollution Degree 2

Mechanical Specifications

  • Material Self-extinguish plastic
  • IP Code IP20
  • Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
  • Tightening Torque 0.8 N m
  • Mounting in compliance with DIN rail standard EN-50022
  • Dimensions in mm.(WxHxT) 100 x 120 x 22.5
  • Weight about 160 gr.

EMC (for industrial environments)

  • Immunity EN 61000-6-2, Emission EN 61000-6-4


Series Information

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.


To View Data Sheet for Datexel Isolated Module Modbus RTU Master with Micro SD Ram Data logging - DAT9000-DL-2.0 Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Data Logging:
1 Micro SD Card
Port 1 Modbus RTU Master, Port 0 Modbus RTU Slave
Modbus RTU Slave
Ethernet 10Base-T, Modbus TCP
Power Supply:
Voltage 10 - 30 Vdc. Reverse polarity protection 60 Vdc
Current Consumption:
80 mA max
Temperature rating:
Operative Temperature -4°F +140°F -20°C +60°C Storage Temperature -40°F +185°F -40°C +85°C
(none condensing) 0-90%
Material self-extinguishing
W x L x H 4 x 4 3/4 x 1inch, 100 x 120 x 22.5mm
160 g
EN 61000-6-2, EN 61000-6-4
1500Vac, 50Hz, 1 Minute
PC Configurable
View AllClose