Datexel
Isolated Module CANopen Slave Device Thermocouple and mV Input - DAT7016
- SKU:
- DAT 7016
- Weight:
- 150.00 Grams
Description
Datexel Isolated Module CANopen Slave Device Thermocouple and mV Input - DAT7016
CAN open protocol, Field Bus data acquisition, DIN rail mounting, EMC compliance – CE Mark - High Quality
The device DAT 7016 is able to acquire up to 4 Thermocouple or mV inputs. The data are transmitted by the CANopen protocol.
By means of 16 bit converters, the device guarantees high accuracy and a stable measure both versus time and temperature.
The 2000 Vac galvanic isolation between inputs, power supply and data line eliminates the effects of all ground loops eventually existing and allows the use of the device in heavy environmental conditions found in industrial applications.
The DAT 7016 is housed in a rough self-extinguishing plastic enclosure of 22.5 mm thickness, suitable for DIN rail mounting in compliance with the EN 50022 standard.
COMMUNICATION PROTOCOLS
On the DAT7000 modules the following communication protocol is implemented:
CANopen Protocol: one of the most used standard communication protocol; it allows to interface the modules of DAT7000 series directly to the CAN Controllers that accept devices in compliance with the CiA DS 301 and CiA DS 401 standards. For communication setting, refer to the User manual.
The advantages and features for Datexel Isolated Module DAT7016
- Field Bus data acquisition
- CANopen protocol
- Baud rate and ID Node programmable by dip-switch
- Configurable input for TC and mV
- Four ways 2000 Vac galvanic isolation
- EMC compliance – CE Mark
- In compliance with EN-50022 DIN rail mounting
Inputs Datexel Isolated Module DAT7016
- Thermocouple (J, K, S, R, B, E, T, N)
- Voltage (mV)
Sample time
- 40 ms
Warm-up time
- 3 min.
Data Transmission
- Baud rate up to 1 Mbps
- Max. Distance in function of the Baud rate
Power Supply
- Supply Voltage 10 ÷ 30 Vdc
- Current consumption 45 mA @ 24 Vdc
- Polarity inverted protection 60 Vdc max
Isolation
- Input/ Output 2000 Vac, 50 Hz, 1min.
- Environmental Conditions
- Operative Temperature -10°C .. +60°C
- Storage Temperature -40°C.. +85°C
- Humidity (not condensed) 0 .. 90 %
- Maximum Altitude 2000 m
- Installation Indoor
- Category of installation II
- Pollution Degree 2
Mechanical specifications
- Material Self-extinguish plastic
- IP Code IP20
- Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
- Tightening Torque 0.8 N m
- Mounting in compliance with DIN rail standard EN-50022
- Weight about 150 g
EMC ( for industrial environments )
- Immunity EN 61000-6-2, Emission EN 61000-6-4
Series Information
About Datexel:
Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.
The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.
Documents
To View Data Sheet for Datexel Isolated Module CANopen Slave Device Thermocouple and mV Input - DAT7016 Please Click HereAdditional Information
Input: |
Thermocouple Type J, K, S, R, B, E, T, N and mV |
Output: |
CANopen |
Power Supply: |
10 to 30 Vdc. Reverse polarity protection 60 Vdc |
Current Consumption: |
Current output 35 mA max. Voltage output 25 mA max |
Temperature rating: |
Operative -4°F +158°F -20°C +70°C Temperature Storage Temperature -40°F +185°F -40°C +85°C |
Humidity: |
(non condensing) 0-90% |
Housing: |
Material self-extinguishing |
Dimensions: |
4" x 4 1/2 " x 1", 100 x 120x x 22.5 mm |
Weight: |
150 g |
EMC: |
For industrial environments. Immunity: EN 61000-6-2. Emission: EN 61000-6-4 |
Configuration: |
PC Configurable and DIP Switch Configurable |