null
Datexel

Isolated Module CANopen Slave device RTD, Resistance Potentiometer - DAT7014

(No reviews yet) Write a Review
SKU:
DAT 7014
Weight:
0.50 Grams
  • Datexel Isolated Module CANopen Slave device RTD, Resistance Potentiometer - DAT7014
  • Isolated Module CANopen Slave device RTD, Resistance Potentiometer - DAT7014

Description

Datexel Isolated Module CANopen Slave device RTD, Resistance Potentiometer - DAT7014

EMC / CE mark, - Baud rate and ID Node programmable, 3 ways 2000 Vac galvanic isolation – Great Quality

The device DAT 7014 is able to acquire up to 4 analogue inputs as RTD 2 / 3 wires or potentiometer sensors. The data are transmitted by the CANopen protocol.

By means of 16 bit converters, the device guarantees high accuracy and a stable measure both versus time and temperature.

The 2000 Vac galvanic isolation between inputs, power supply and data line eliminates the effects of all ground loops eventually existing and allows the use of the device in heavy environmental conditions found in industrial applications.

The DAT 7014 is housed in a rough self-extinguishing plastic enclosure of 22.5 mm thickness, suitable for DIN rail mounting in compliance with the EN 50022 standard.

COMMUNICATION PROTOCOLS

On the DAT7000 modules the following communication protocol is implemented:

CANopen Protocol: one of the most used standard communication protocol; it allows to interface the modules of DAT7000 series directly to the CAN Controllers that accept devices in compliance with the CiA DS 301 and CiA DS 401 standards.

The advantages and features for Datexel Isolated Module DAT7014:

  • Field Bus data acquisition
  • CAN open protocol
  • Baud rate and ID Node programmable by dip-switch
  • Configurable input for RTD, Resistance and Potentiometer
  • 3 ways 2000 Vac galvanic isolation
  • EMC compliance – CE Mark
  • In compliance with EN-50022 DIN rail mounting

Input for Datexel Isolated Module DAT9011-DL-2.0

  • RTD 2,3 wires Pt100 Pt1000 Ni100 Ni1000
  • RES. 2,3 wires
  • Potentiometer

In compliance with

  • the CiA DS 301 and CiA DS 401 standard.

Data Transmission

  • Baud rate up to 1 Mbps

POWER SUPPLY

  • Supply voltage 10 ÷ 30 Vdc
  • Current consumption 45 mA @ 24 Vdc
  • Polarity rev. protection 60 Vdc max.

ISOLATION

  • 2000 Vac 50 Hz, 1 min.

ENVIRONMENTAL CONDITIONS

  • Operative Temperature -10°C .. +60°C
  • Storage Temperature -40°C.. +85°C
  • Humidity (not condensed) 0 .. 90 %
  • Maximum Altitude 2000 m
  • Installation Indoor
  • Category of installation II
  • Pollution Degree 2

MECHANICAL SPECIFICATIONS

  • Material Self-extinguish plastic
  • IP Code IP20
  • Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
  • Tightening Torque 0.5 N m
  • Mounting in compliance with DIN rail standard EN-50022
  • Weight about 150 g.

CERTIFICATIONS

  • EMC (for industrial environments) Immunity EN 61000-6-2, Emission EN 61000-6-4

 

Series Information

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

To View Data Sheet for Datexel Isolated Module CANopen Slave device RTD, Resistance Potentiometer - DAT7014 Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Input:
RTD’s Pt100, Pt1000, Ni100, Ni1000. Resistance, Potentiometer. See Data sheet for range
Output:
CANopen
Power Supply:
10 to 30 Vdc. Reverse polarity protection 60 Vdc.
Current Consumption:
Current output 35 mA max. Voltage output 25 mA max
Temperature rating:
Operative -4°F +158°F -20°C +70°C Temperature Storage Temperature -40°F +185°F -40°C +85°C
Humidity:
(non condensing) 0-90%
Housing:
Material self-extinguishing
Dimensions:
4" x 4 1/2 " x 1", 100 x 120x x 22.5 mm
Weight:
150 g
EMC:
For industrial environments. Immunity: EN 61000-6-2. Emission: EN 61000-6-4
Configuration:
PC Configurable and DIP Switch Configurable
View AllClose