Fiber Optic Sensor 10mm Thickness, NPN & PNP Output - FZ1-KP2

(No reviews yet) Write a Review
150.00 Grams
Minimum Purchase:
1 unit



RiKO’s FZ1-KP2 is a fiber amplifier Din-rail type. PNP/NPN type with L-on/D-on and frequency of 1 kHz. Wire type is 4 wires with a connection of the 2-meter cable. FZ1-KP2 from RiKO comes with the following features:

  • Small size, 10mm thickness, can be mounted in small spaces. Several amplifiers can be mounted side by side.
  • 20-turns sensitivity adjuster. The optimum sensitivity can be set easily.
  • Long (long-distance): 8~11cm. Middle (middle distance): 4~6cm selectable.


Brand Information

RiKO OPTOELECTRONICS TECHNOLOGY CO., LTD. founded in 1988, is a professional Fiber Optics Sensor / Photo Sensor / Proximity Sensor/ Capacity Sensor manufacturer in Taiwan. They have been committed to offering the highest quality and best products solving their customers' needs for industrial automation from the beginning.

Through aggressive R&D and the introduction of new products, they have become a leading manufacturer for the global market. Their brand, RiKO has had an excellent reputation for developing and supplying reliable products around the world, where customers also benefit from their wide range of services.

View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Emitting light:
Red LED 680 nm.
Operating voltage:
DC 12-24V ±15%.
Current consumption:
40mA max
Load current:
100mA max. At DC 24V.
Output type:
PNP-NPN. L.on/D.on.
Protection circuit:
Reversed polarity protection, over-current protection.
Response time:
On: 200 ms, off: 1ms
Output indicator Red LED. Power indicator Green LED.
Sensitivity adjustment:
20 turns trimmer.
Insulation resistance:
20MΩ min. (DC 500V)
Voltage withstand-ability:
500 VAC 60 Hz for 1min.
Operating temperature:
Ambient humidity:
35~85% RH.
Protection degree:
Wiring method:
Pre-wired Ø4.2x2M/4-wired
Approx. 65g.
View AllClose