null
Datexel

Universal Transmitter Current output - DAT2015

(No reviews yet) Write a Review
SKU:
DAT2015
MPN:
DAT2015
Weight:
90.00 Grams

Description

Datexel Universal Transmitter - DAT2015

PC programmable and two wire

The transmitter DAT 2015 is able to execute many functions such as : measure and linearization of the temperature characteristic of RTDs sensors, conversion of a linear resistance variation, conversion of a standard active current signal, conversion of a voltage signal even coming from a potentiometer connected on its input. Moreover the DAT 2015 is able to measure and linearize the standard thermocouples with internal cold junction compensation. The measured values are converted in a 4÷20 mA current signal . The device guarantees high accuracy and performances stability both in time and in temperature.
The programming of the DAT 2015 is made by a Personal Computer using the software PROSOFT, developed by DATEXEL, that runs under the operative
system "WindowsTM ". By use of PROSOFT, it is possible to configure the transmitter to interface it with the most used sensors .
In case of sensors with a no-standard output characteristic, it is possible to execute, via software, a "Custom" linearization (per step) to obtain an output
linearized signal .
For Resistance and RTDs sensors it is possible to program the cable compensation with 3 or 4 wires; for Thermocouples it is possible to program the Cold
Junction Compensation ( CJC ) as internal or external.
It is possible to set the minimum and maximum values of input and output ranges in any point of the scale, keeping the minimum span shown in the table below.
Moreover, it is available the option of alarm for signal interruption (burn-out) that allows to set the output value as high or low out of scale .
The DAT 2015 is in compliance with the Directive 2004/108/EC on the Electromagnetic Compatibility.
It is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.

DAT2015 from Datexel comes with the following features:

  • Configurable input for RTD, TC, mV, V, mA, Resistance and Potentiometer.
  • 4 ... 20 mA configurable output on the current loop.
  • Configurable by Personal Computer.
  • High accuracy.
  • On-field reconfigurable.
  • EMC compliant with CE mark.
  • Suitable for DIN rail mounting in compliance with EN-50022 and EN50035.

Input type for Datexel DAT2015

The TC, RTD and analog signals for this model as Input is as follows:

  • Thermocouple: J, K, S, R, B, E, T, N
  • RTD: Pt100, Pt1000, Ni100, Ni1000
  • Voltage: mV, V
  • Potentiometer
  • RES. 2,3,4 wires
  • Current: mA

Output type

Current Output for this temperature transmitter is:

  • Direct Current: 4 mA … 20 mA
  • Reverse Current: 20 mA … 4 mA

Response time 

The response time for this transmitter is about 400 ms. 

Power supply

power supply voltage for Datexel 2015 is the standard 10 to 32 VDC. Also Reverse polarity protection is 60 VDC max.

Temperature & humidity Consideration

The environmental condition for storage and operational situation for this device is as comes next:

  • Operative temperature -20°C ... +70°C
  • Storage temperature -40°C ... +85°C
  • Humidity (not condensed) 0 ... 90 %

Housing

The quality of the housing and mounting situation is as follows:

  • Material: Self-extinguish plastic
  • Mounting: DIN rail in compliance with EN-50022 and EN-50035
  • Weight: about 90 g.

Industries/applications

  • Furnace
  • Oil and gas
  • Brick manufacturing
  • Heat Exchangers
  • Industrial Processes
  • Heating/cooling systems

 

Series Information

Datexel products are made to the very highest standards and all products carry the CE mark, and since March 2015 all slim-line products and DAT3000 modules carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safe environments. In July 2006, Datexel confirmed its products to the RoHS Directive Standard (2002/95/EC) which imposes restrictions on the use of dangerous substances for the manufacturing of electric and electronic equipment. Situated in Jupiter, Florida USA.

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

To View Datexel Universal Transmitter DAT2015 Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Input type:
TC (J, k, S, R, B, E, T, N), RTD (PT100, PT1000, Ni100, Ni1000), Voltage (mV, V), Potentiometer, RES. 2,3,4 wires, Current (mA)
Output type:
Direct current (4 ... 20 mA), Reverse current (20 ... 4 mA)
Response time (10÷ 90%):
About 400ms.
Power supply voltage:
10…32VDC.
Reverse polarity protection:
60VDC max.
Operative temperature:
-20°C …+70°C.
Storage temperature:
-40°C …+85°C.
Humidity (not condensed):
0 …90 %.
Material:
Self-extinguish plastic.
Mounting:
DIN rail In compliance with EN-50022 and EN-50035.
Weight:
About 90g.
Immunity:
EN 61000-6-2.
Emission:
EN 61000-6-4.
View AllClose