Datexel Data Acquisition And Control Modules Canopen Distributed I/O Modules DAT 7014

Write a Review
DAT 7014
0.50 Grams
Calculated at Checkout
  • Datexel Data Acquisition And Control Modules Canopen Distributed I/O Modules DAT 7014
  • Datexel Data Acquisition And Control Modules Canopen Distributed I/O Modules DAT 7014


The DAT7014 receives inputs from RTD's, Resistors and Potentiometers. The analog signal is transformed to 16 Bit data and Transmitter by the CANopen protocol.

This product conforms to CiA DS 301 and CiA DS 401 and can border directly with the CAN Controllers that accept CiA DS 301 and CiA DS 401 Standards.

The Baud rate and the ID are programmable by DIP switches positioned on the side of the enclosure. The Inclusion is DIN rail mounted and is 22.5 mm thick. The terminals of this product are plugged in so the device can be hot swapped. This product is in isolation state up to 2000 Vac for 1 minute between the Input, CANopen network and the power supply.

Some Features of DAT7014 aregiven as under

  • This product is RTD to CANopen.
  • This product is Potentiometer to CANopen.
  • This product is Resistance to CANopen.
  • This particular product is DIP Switch Configurable.
  • It also has DiA DS and CiA DS 401 Compliance
  • This product is also DIN Rail Mounted.

Some Applications Of DAT7014 are given as under

  • It has applications as4 Channel CANopen RTD's and 4 Channel CANopen Resistance.
  • Also has its applications as 4 Channel CANopen Potentiometer.


Brand Information

Products designed by Datexel are made keeping all the standards in mind and all products carry the CE mark, and from March 2015 all Slimline products and DAT3000 modules are supposed to carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safety environments.

In July 2006, there was the conformation of products to the RoHs Directive Standard (2002/95/EC) which enforces restrictions on the use of unsafe substances for the engineering of electric and electronic equipment.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

RTD’s Pt100, Pt1000, Ni100, Ni1000. Resistance, Potentiometer. See Data sheet for range
Power Supply:
10 to 30 Vdc. Reverse polarity protection 60 Vdc.
Current Consumption:
Current output 35 mA max. Voltage output 25 mA max
Temperature rating:
Operative -4°F +158°F -20°C +70°C Temperature Storage Temperature -40°F +185°F -40°C +85°C
(non condensing) 0-90%
Material self-extinguishing
4" x 4 1/2 " x 1", 100 x 120x x 22.5 mm
3 oz 90 g
For industrial environments. Immunity: EN 61000-6-2. Emission: EN 61000-6-4
PC Configurable and DIP Switch Configurable
View AllClose