Counter FX6M-1P4

Write a Review
180.00 Grams
Minimum Purchase:
1 unit
Calculated at Checkout


The FXM/FXH series digital counter/timers integrate functions of both counters and timers. Counting speeds of 1 cps, 30 cps, 2kcps, and 5kcps are available and various time setting ranges are also available for the timer function. Count-up, count-down, and count up/down modes are available for accurate measurement and display of various system configurations. Users can easily switch between NPN/PNP inputs using the attached DIP switch. The FXM/FXH series is available in 4-digit, 6-digit, and 8-digit models in 2 Standard DIN sizes (W 72 x H 72, W 48 x H 96 mm)

The FX6M-1P4 from Autonics is a counter and timer with 4 digits LED and relay + NPN output, 100-240VAC~ 50/60Hz.

The FX6M-1P4 from Autonics comes with the following upgraded functions:

  • DIN W48 x H96mm, W72 x H36, W144 x H72 counter/timer.
  • 36 input modes and 20 output modes.
  • Counting speed: 1cps/30cps/2kcps/5kcps.
  • Selectable voltage input (PNP) or no voltage input NPN.
  • Addition of UP/Down input modes.
  • Wide range of power supply: 100-240VAC 50/60Hz, 12-24VAC/DC option.
  • Selectable timer/counter by internal DIP switch.
  • Various time ranges.
  • Built-in microprocessor.


Product Specifications




  • Digits





  • Digit size


W4 x H8mm.

  • Power supply

AC voltage type

100-240VAC 50/60Hz

AC/DC voltage type

12-24VAC 50/60Hz/12-24VDC (universal).

  • Allowable voltage range

90 to 110% of voltage rated.

  • Power consumption

AC voltage type

*Indicator type: approx 6VA.

*Single present: approx. 7VA.

*Dual present: approx 8VA (240VAC 50/60 Hz).

AC/DC voltage type

*Indicator type: approx 5.8VA.

*Single present: approx. 6.8VA.

*Dual present: approx 7.6VA (240VAC 50/60 Hz).

*Indicator type: approx 2.7W.

*Single present: approx. 3.3W.

*Dual present: approx 3.8W (24VDC).

  • Max. counting speed for CP1 and CP2

Selectable 1cps/30 cps/2k cps/5k cps by internal DIP switch.

  • Min. input signal width

Reset input


Approx. 20ms.

Inhibit input

  • Input

CP1, CP2 input (INHIBIT)

Input logic is selectable.

[Voltage input] input impedance is 5.4KΩ, ‘H’ level: 5-30VDC, ‘L’ level 0-2VDC.

[No-voltage input] short-circuit impedance Max. 1kΩ, residual voltage, Max.2VDC.

Open circuit impedance: min 100KΩ.

RESET input

  • One-shot output

Single present type: 0.05-5sec.

Dual present type: 1st output 1 NPN open collector, 2nd output 1 NPN open collector.








  • Control output

Without com.

Contact output

Dual preset: SPST (1a) 2EA.

Single preset: SPDT (1c) 1EA.

Solid-state output

Dual preset: 1NPN open collector.

Single preset: 1NPN open collector.



Single preset: SPDT (1c),

Dual present type: 1st output SPDT (1c), 2nd output SPDT (1c).


250VAC 3A at resistive load.

Solid state


Single preset: 1 NPN open collector.

Dual preset: 1st out 1 NPN open collector, 2nd output 1 NPN open collector.


30VDC Max. 100mA max.

  • External sensor power

12VDC ±10%, 50mA max.


  • Memory retention

10 years (when using non-volatile semiconductor memory type).


  • Insulation resistance

100MΩ (at 500VDC megger).

  • Dielectric strength

2000VAC 50/60Hz for 1 min.



  • Noise strength


AC power

±2KV the square wave noise (pulse width: 1µs) by the noise simulator.

DC power

±500V the square wave noise (pulse width: 1µs) by the noise simulator.


  • Vibration


0.75mm Amp. at freq. 0f 10-55Hz (for 1min.) in each X, Y, Z directions for 1 hour.


0.5mm Amp. at freq. 0f 10-55Hz (for 1min.) in each X, Y, Z directions for 10 min.


  • Shock


300m/s2 (approx. 30G) in each X, Y, Z directions for 3 times.


100m/s2 (approx. 10G) in each X, Y, Z directions for 3 times.


  • Relay life cycle


Min. 10,000,000 operations.


Min. 100,000 operations.

  • Protection

IP65 (front panel only).


  • Environment

Ambient temp.

-10~55◦C, storage -25~65◦C.

Ambient humidity

35-85% HR, storage: 35-85% HR.


  • Relay lifecycle


Min. 10,000,000 operations.


Min. 100,000 operations at 250VAC 2A (resistive load).

  • Approval


  • Unit weight

Approx. 395g.

Brand Information

“Autonics” is a leading provider of automation solutions from South Korea. They develop and manufacture a wide range of automation products that are marketed worldwide. Their core products include various sensors, controllers, and motion devices, measuring equipment, laser marking systems, connection equipment and more. Autonics products are trusted and adopted by engineers in various industrial applications and their technology is widely applied in day-to-day automation devices.

With 12 international offices in South Korea, China, Japan, India, Vietnam, Indonesia, Malaysia, Russia, Turkey, USA, Brazil, Mexico, Autonics is able to provide comprehensive automation solutions for their customers across the globe.


Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose