Autonics Sensors Rotary Encoders E50S SERIES E50S8-1024-3-T-1 (A2500000283)

Autonics E50S8-1024-3-T-1 Rotary Encoder

The Autonics E50S8-1024-3-T-1 rotary encoder has an Ø8 mm shaft and 1024 PPR resolution with A, B, and Z output phases. It features a totem-pole control output, operates on 5–24 VDC, and uses an axial cable connection. The maximum response frequency is 300 kHz, with a maximum allowable revolution of 5,000 rpm.

Technical Specifications

Environmental resistance ratings apply under conditions with no freezing or condensation.

Frequently Asked Questions

Can the E50S8-1024-3-T-1 be ordered with a higher protection rating than IP50?

Yes. For the axial cable type, the manufacturer states that an optional IP64 protection structure is available to order.

What should be checked when determining the maximum usable rotational speed for the selected resolution?

The calculated maximum response revolution must not exceed the encoder’s maximum allowable revolution. The manufacturer specifies the calculation as: Max. response frequency ÷ Resolution × 60. The resulting value must be checked against the maximum allowable revolution of 5,000 rpm.

Are the Ø8 mm coupling and bracket included with the encoder?

The datasheet lists an Ø8 mm coupling and bracket as accessories, but it does not state whether they are included in the standard supply. The supply scope should therefore be confirmed when ordering.