TECPEL Electricals and Electronics Testing Multimeters DMM-8060

Write a Review
580.00 Grams
Minimum Purchase:
1 unit
Calculated at Checkout


A multimeter or a multi-tester, also known as a VOM (volt, ohm, milli-ammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure voltage, current, and resistance. Analog multimeters use a micro-ammeter with a moving pointer to display readings.

DMM-8060 from Tecpel is a modern digital multimeter loaded with a variety of functions.

DMM-8060 from Tecpel comes with the following properties:

  • 3 3/4 digits, 3,999 counts.
  • AC True R.M.S. Measurement and RS-232C interface ( DMM-8061).
  • Auto and manual ranging.
  • Data Hold Function.
  • Relative Mold.
  • Capacitance measurement.
  • Temperature measurement ( -40 ~ 1,000 deg C).
  • Frequency Measurement (10Hz ~ 10 MHz).
  • Audible Continuity Check.
  • Diode Test.
  • Overload protection.
  • Fused 10A protection.

Brand Information

Tecpel Co. Ltd. has over 20 years of experience in the Test and Measurement market. They have set up over 50 country distributors worldwide. Some of their products have been branded by famous leaders in the market. About 60% of their customers are repeat customers. Tecpel imports products from Japan and carries out quality checks. Their products are exported to Europe mainly. If customers find a fault with the product, they will replace it with a new product within 2-3 days.\


They are regarded as one of the leading Taiwanese manufactures of high quality test and measurements. Their product lines include power supplies, oscilloscopes, electronics & electrical meters and testers. Tecpel’s quality products have been accepted by some well-known international customers. The confidence they have in their products is reflected in their one-year warranty and by their flat-rate service policy through 3-5 years.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One-Year Warranty
View AllClose

Additional Information

DC Voltage Ranges:
400mV/4V/40V/400V/500V (0.8%+1).
AC Voltage Ranges:
4V/40V/400V/750V (1%+5).
DC current ranges:
400mA/4000mA/40mA/400mA/4A/10A (1%+2).
AC current ranges:
400mA/4000mA/40mA/400mA/4A/10A (1.5%+5).
Resistance Ranges:
400Ω/4k Ω /40k Ω /400k Ω /4M Ω /40M Ω (1%+2)
Special functions Auto Ranging. Diode. Continuity Buzzer. Transistor. Low Battery Display. Input Impedance for DC. Voltage Measurement around 10MW. Max. Display 3999. Data Hold. Auto/Manual Range Selectable. Display Backlight. Relative mode. Power:
9V Battery (6F22).
LCD Size:
63 x 31mm.
Max. Display:
10A Range
40nF/400nF/4mF/40mF/100mF (3%+5).
10Hz-10MHz (0.1%+3).
Temperature (◦C):
-40◦C ~ 1000◦C (1%+3).
Duty Cycle:
0.1% ~ 99.9%.
Product Color:
Yellow and Grey
Product Net Weight:
Product Size:
177 x 85 x 40mm.
Standard Accessories:
The test lead, Battery, English Manual, Point Contact Temperature Probe, T-Test Clip.
View AllClose