TECPEL Electricals and Electronics Testing LCR Meters LCR-612

Write a Review
700.00 Grams
Minimum Purchase:
1 unit
Calculated at Checkout
  • LCR-612 LCR Meter
  • LCR-612 LCR Meter
  • LCR-612 LCR Meter


An LCR meter is a type of electronic test equipment used to measure the inductance, capacitance, and resistance of an electronic component.

LCR-612 from Tecpel is a digital handheld inductance, capacitance, and resistance measuring meter with dual display and auto-ranging.

LCR-612 from Tecpel comes with the following properties:

  • Basic accuracy: 0.5% for Resistance, 0.7% for Inductance, Capacitance..
  • Dual Displays provide quick tested results readouts, with L.C.R. Display values up to 19999 counts and Q.D.R. display values up to 9999 counts.
  • Excellent resolutions: Resistance up to 0.001Ω. Inductance Capacitance up to 0.1uH/0.1pF.
  • Provided up to 4 testing parameters: Ls+(Q,D,Rs), Lp+(Q,D,Rp), Cs+(Q,D,Rs), Cp+(Q,D,Rp).
  • Auto-Power Off function: To conserve battery life for longer use.
  • Fuse detection function: To inform that the fuse is open or damaged.

External DC Adapter functions: Use of a DC adapter can also serve to disable Auto Power Off function.


Brand Information

Tecpel Co. Ltd. has over 20 years of experience in the Test and Measurement market. They have set up over 50 country distributors worldwide. Some of their products have been branded by famous leaders in the market. About 60% of their customers are repeat customers. Tecpel imports products from Japan and carries out quality checks. Their products are exported to Europe mainly. If customers find a fault with the product, they will replace it with a new product within 2-3 days.


They are regarded as one of the leading Taiwanese manufactures of high quality test and measurements. Their product lines include power supplies, oscilloscopes, electronics & electrical meters and testers. Tecpel’s quality products have been accepted by some well-known international customers. The confidence they have in their products is reflected in their one-year warranty and by their flat-rate service policy through 3-5 years.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

LCR Display:
4 1/2 digits, maximum reading of 19999.
QDR Display:
4 digits, maximum reading of 9999. (Auto range).
Parameter Measurement:
Ls+ (Q, D, Rs), Lp+ (Q, D, Rp). Cs+ (Q, D, Rs), Cp+ (Q, D, Rp).
“OL” displayed.
Test Frequency:
1KHz and 120Hz.
Range Mode:
Auto and Manual.
Auto Power Off:
The meter key switch inactive for more than 5 minutes, press power key to resume operation.
Measurement rate:
Approx. 1 time per second, nominal.
Power Requirement:
(1). Single standard 9-volt battery. (NEDA 1604, IEC 6F22 006P). (2). External DC Adapter 12Vmim to 15Vmax / 50mA. (Optional).
Overload Protection:
0.1A/250V fast below fuse.
192mm (H) x 91mm (W) x 52.5mm (D).
365g. (including accessories).
View AllClose