Programming Tools & Software - PRODAT 05 USB

(No reviews yet) Write a Review
250.00 Grams


Datexel Programming Tools & Software - PRODAT 05 USB

Suitable to configure the SMART and SLIM series devices, Internal battery, EMC compliant – CE mark – High Quality

The program interface PRODAT-05 is suitable to program, by proper software, all the DATEXEL devices of SMART series using any Personal Computer, both desktop and laptop type with USB serial port.

An internal battery is provided to supply the transmitters on programming on the plug J4; to connect these devices it is possible to use the proper pre-assembled cable supplied with the PRODAT-05.

Moreover, if the battery is exhausted or not available, an external power supply source (within the range 5 Vdc to 30 Vdc providing a current higher than 50 mA), could be connected to the plug J3 to power the interface.

By this interface it is also possible to program the devices for DIN B in-head mounting (not for the Intrinsically Safe devices) without the connection of the current loop.

The interface is 1500 Vac galvanic isolated between the input/power supply side and the output side.

By the PRODAT USB it is also possible to program the intrinsically safe transmitters using the CVPR-03 special cable.

The PRODAT USB is provided in a tool-kit which includes: the standard cable CVP or the cable CVPR-03 (indispensable to program the DATEXEL Intrinsically Safe transmitters), the CD-ROM containing the installation drivers and the programming software PROSOFT and its User Guide, a pre-assembled power cable and the JACK plug necessary to realize the cable for the connection on the plug J3.

The programming interface PRODAT-05 is in compliance with the Directive 2004/108/EC on the electromagnetic compatibility.

The advantages and features for Datexel PRODAT 05 USB

  • Suitable to configure the SMART and SLIM series devices
  • Galvanic isolation between transmission and receipt
  • Internal battery
  • Programming of the device for DIN B in-head mounting without power supply
  • EMC compliant – CE mark
  • Configuration of DATEXEL devices, in field too


  • Type of battery (Optional) 6LF22 / 9 Vdc
  • External supply (Optional) 10 ÷ 30 Vdc (Transmitters), 18 ÷ 30 Vdc (Converters)
  • PC connection USB connector
  • CVP/CVPR-03 cable connection RJ11 4 ways plug
  • External power supply connection IN 2.1 mm JACK connector
  • External power supply connection OUT 2.5 mm JACK connector
  • Current consumption </= 5 mA
  • Electromagnetic Compatibility (EMC) Immunity: EN 61000-6-1; Emission: EN 61000-6-3
  • Operating temperature 0 ÷ 40 °C
  • Storage temperature (without battery) - 20 ÷ 60 °C
  • Isolation voltage 1500 Vac, 50 Hz, 1 min.
  • Relative humidity (non cond.) 0 ÷ 90%
  • Weight approx. 250 g


Series Information

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.


To View Data Sheet for Datexel Programming Tools & Software - PRODAT 05 USB Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

External supply:
10 ÷ 30 Vdc (Transmitters) 18 ÷ 30 Vdc (Converters)
1500 Vac Power Supply / Output
Temperature rating:
Operative -4°F +145°F -20°C +60°C Temperature Storage Temperature -40°F +170°F -40°C +85°C
(None condensing) 0-90%
Material self-extinguishing
W 4 L 2 1/2 H 3/4" 100 mm X 61 mm x 22mm
250 g
Immunity: EN 61000-6-1; Emission : EN 61000-6-3
View AllClose