Multifunction Calibrator CL-325

(No reviews yet) Write a Review
SKU:
CL-325
MPN:
CL-325
Weight:
500.00 Grams
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
  • Measurement Instruments,Calibrators,Process Calibrator  Cl-325,Multi-Function Calibrator,Cl-325,Tecpel
  • Measurement Instruments,Calibrators,Process Calibrator  Cl-325,Multi-Function Calibrator,Cl-325,Tecpel
$818.00

Description

The calibrator or process calibrator is used for basic measuring, testing and regulation techniques for setting and verifying test installations and instrumentation. These measurement signals or regulated magnitudes are denominated as the test signal, which the calibrator can provide.

CL-325 from Tecpel is a battery-powered, hand-held process calibrator that allows process technicians to simulate and source variables signals. Output signals including DC voltage, DC current, ohms, analog transmitters, thermocouple, RTD, frequency, pulse, Switch On-OFF, are widely used in measurement and calibration for industrial field and laboratory application, it is one of the necessary tools used to test and calibrate industrial automation systems and instruments.

CL-325 from Tecpel from Tecpel comes with the following general characteristics:

  •  4-20mA (1K Ohm load, 24V Loop Supply).
  • 0-100.00mV,0-1.000V, 0-12.000V.
  • K, J, E, T Thermocouple (°C and °F).
  • Frequency 1-62500 Hz.
  • 0.025% Basic Accuracy.
  • Easy Key-pad Operation.
  • Easy Step and Auto Ramp Functions.
  • 0-20mA, 0-24mA selectable.
  • 0-100% Input (mA, mV, V ).

Beeper warning when output is open (mA) or short (mV, V)

 

Brand Information

Tecpel Co. Ltd. has over 20 years of experience in the Test and Measurement market. They have set up over 50 country distributors worldwide. Some of their products have been branded by famous leaders in the market. About 60% of their customers are repeat customers. Tecpel imports products from Japan and carries out quality checks. Their products are exported to Europe mainly. If customers find a fault with the product, they will replace it with a new product within 2-3 days.

They are regarded as one of the leading Taiwanese manufactures of high quality test and measurements. Their product lines include power supplies, oscilloscopes, electronics & electrical meters and testers. Tecpel’s quality products have been accepted by some well-known international customers. The confidence they have in their products is reflected in their one-year warranty and by their flat-rate service policy through 3-5 years.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One-Year Warranty
View AllClose

Additional Information

• Battery Type:
9V Alkaline Battery.
• Power Consumption:
60mA - 180mA (depends on output).
• Low battery:
5.5V at 150mA Load.
• Display:
4 and 5 Digits.
• Operating Temperature:
0 to 50°C (32 to 122 °F).
• Operating Humidity:
Less than 85% relative.
• Storage Temperature:
-20 to 60° C (-4 to 140 °F).
• Storage Humidity:
Less than 85% relative
• Dimension:
88 x 168 x 26 mm. (3.46"" x 6.61"" x 1.03"").
• Weight:
330 g / 11.63 oz.
• Accessories:
• Carrying case x 1. • Users Manual x 1. • K type thermocouple connector. • External Battery Pack Holder. • 1.5V AA Batteries x 6. • Test leads with Alligator clip x 1.
• Electrical Specifications:
(23°C ± 5°C, 3 minutes after power is on)
• mA DC Current. • (1K Ohm Max. Load, 24V Loop Supply). • Beeper warning when output is open and specified current output > 1mA.:
• mV, V DC Voltage (1mA Supply Current). • Beeper warning when output is short and specified voltage output > 10mV.
• Range, Resolution, Accuracy:
4 - 20mA, 0 - 20mA, 0 -24mA 1µA ± 0.025% ± -3 µA.
• Range, Resolution, Accuracy:
• 0 - 100.00mV 10µV ± 0.05% ± 30µV. • 0 - 10.000V 1mV ± 0.05% ± 3mV. • 0 - 1.0000V 100µV ± 0.05% ± 300µV.
• K, J, E, T Type Thermocouples:
( 1°C, 1°F Resolution,1K Ohm load Min.)
View AllClose