Infrared Thermometer 2.5:1 DS, -55…250℃, with food cooking thermocouple - D-175

(No reviews yet) Write a Review
200.00 Grams
Minimum Purchase:
1 unit
  • Infrared Thermometer 2.5:1 DS, -55…250℃, with food cooking thermocouple - D-175
  • Infrared Thermometer 2.5:1 DS, -55…250℃, with food cooking thermocouple - D-175
  • Infrared Thermometer 2.5:1 DS, -55…250℃, with food cooking thermocouple - D-175



A thermometer measures the temperature of the environment or material that we are operating on. Two means help the thermometer to display the signal. First, the digital sensor in infrared models, and secondly the converter that shows the numbers.You can use a thermometer to tell the temperature outside or inside your house, inside ovens, even the temperature of your body if you have a fever.

D-175 Infrared Cooking Thermometer from Tecpel is most widely used because of its convenience. It is ideal to check the temperature of food while cooking to achieve culinary perfection.

D-175 from Tecpel comes with the following properties:

  • Zone Display: Clearly indicate the Food is under a dangerous (4~60°C/40~140°F) or safe zone.
  • 2in1 design: Infrared + Foldable Thermocouple Probe.
  • IP65 Protection.
  • Bright White LED as a pointer.
  • Ultra-Thin Design, fit into a shirt pocket.
  • NIST traceable: Certificate of Calibration Available (COC Optional).
  • IR-SoC technology (Infrared System on Chip) and Batch Calibration technology drive the dimensions and cost to the lowest limits.
  • Max; Min and Lock modes.
  • Retractable probe.
  • Dual Display.
  • Auto Power-off.
  • Laser spot marker on-off switch available.
  • Electricity Cut Off Memory.
  • MAX, MIN temperatures, DIF, AVG temperatures.
  • Double Display Backlight: Electro Luminescent (EL) Backlight
  • Sleep Mode to save battery power.
  • Tripod mount: Equipped with a tripod mount hole for a stand that can monitor temperature
    continuously for hours.
  • Low Battery Display warning.
  • Temperature Data Hold Feature after releasing the triggering button.

Brand Information

Tecpel Co.  Ltd. has over 20 years of experience in the Test and Measurement market. They have set up over 50 country distributors worldwide. Some of their products have been branded by famous leaders in the market. About 60% of their customers are repeat customers. Tecpel imports products from Japan and carries out quality checks. Their products are exported to Europe mainly. If customers find a fault with the product, they will replace it with a new product within 2-3 days.


They are regarded as one of the leading Taiwanese manufactures of high quality test and measurements. Their product lines include power supplies, oscilloscopes, electronics & electrical meters and testers. Tecpel’s quality products have been accepted by some well-known international customers. The confidence they have in their products is reflected in their one-year warranty and by their flat-rate service policy through 3-5 years.

View AllClose

Warranty Information

One-Year Warranty
View AllClose

Additional Information

IRT + Probe.
IP Classification:
IP 65.
Measurement range:
-55~250°C (-67~482°F).
Infrared Accuracy (Temp:
23+/ -3°C)=(Temp object=-33~0°C): +/-(1°C +0.1/degree). (Temp. object=0~ 65°C): +/-1°C. (Temp object=65~250°C): +/-1.5% of reading.
Thermocouple Accuracy:
Below -5:+/-1°C,-5~ 65 : +/-0.5°C,above 65 :+/-1% of reading.
Distance: Spot:
Max, Min, Lock, Food Code Zone Display.
Temp. range:
Data logging Capacity:
100 points.
Display Accuracy:
1.8°C or 1.8%.
0.5°C or-0.5%.
Display Resolution:
Distance to Spot Size:
Laser Power:
Wavelength 630-670 nm.
Scale selection:
°C/°F Celsius /Fahrenheit available
Power requirement:
USB (Auto Double Display Backlight) or 9V Battery (6F22).
View AllClose