Datexel Ethernet Gateway Modbus TCP IP Modbus RTU - DAT3580 MBTCP

Ethernet Gateway Modbus TCP Modbus RTU, Highly Accurate – made in Italy

The gateway DAT3580-MBTCP allows to connect the Modbus RTU devices of a RS-485 network to the Ethernet network through the Modbus TCP protocol.

By means of the Telnet interface it is possible to configure all the Modbus TCP side options (IP address, subnet mask, etc..) and the Modbus RTU side options (baud rate, etc...).

The device guarantees a full isolation between lines, allowing the use even in the heavy environmental conditions.

DAT3000 series devices are designed to be easily mounted on DIN rail, optimizing the space encumbrance. Whereas the thermal dissipation allows it, the devices can be mounted side by side, allowing a relevant reduction of space requiring. The connections are made by means of removable screw terminals, to simplify the handling of the devices.

LED signaling of Ethernet activity and data rx-tx on the serial line allows a direct monitoring of the system functionality. The connection is made by removable screw-terminals (supply and RS-485) and RJ45 plug (Ethernet).

The DAT 3580-MBTCP is in compliance with the Directive UL 61010-1 for US market and with the Directive CSA C22.2 No 61010-1 for the Canadian market.

The device is housed in a rough self-extinguishing plastic container which, thanks to its thin profile of 22.5 mm only, allows a high density mounting on EN50022 standard DIN rail.

The advantages and features for DAT3580 MBTCP:

• Network interface Ethernet 10/100Base-T, Modbus TCP
• RJ45 connection
• Telnet configuration
• RS-485 Serial interface
• Modbus RTU Master
• Baud rate up to 115.2 Kbps
• Distance up to 1200 m, up to 32 devices in multipoint
• Removable screw-terminal connection
• LED signaling for Link/Act Ethernet, serial RX-TX, power supply
• Galvanic Isolation on all ways
• UL / CE mark
• Suitable for DIN rail mounting in compliance with EN-50022

In compliance with standard

• Ethernet IEEE 802.3 and RS485

Network interface Ethernet 10/100Base-T

• Protocol Modbus TCP

RS485 Interface

• Baud-rate up to 115.2 Kbps

POWER SUPPLY

• Power supply voltage 18 ÷ 30 Vdc
• Reverse polarity protection 60 Vdc max

Current consumption

• 80 mA max.

Connection

• Ethernet RJ-45
• RS-485/422 removable screw terminals

ENVIRONMENTAL CONDITIONS

• Operative Temperature -20°C .. +60°C
• UL Operative Temperature -10°C .. +40°C
• Storage Temperature -40°C.. +85°C
• Humidity (not condensed) 0 .. 90 %
• Maximum Altitude 2000 m
• Installation Indoor
• Category of installation II
• Pollution Degree 2

MECHANICAL SPECIFICATIONS

• Material Self-extinguish plastic
• IP Code IP20
• Wiring wires with diameter 0.8÷2.1 mm2 /AWG 14-18
• Tightening Torque 0.5 N m
• Mounting in compliance with DIN rail standard EN-50022
• Weight about 160 g.

CERTIFICATIONS

EMC (for industrial environments)Immunity EN 61000-6-2, Emission EN 61000-6-4

UL

• US Standard UL 61010-1