Description
Autonics TX4S-B4R Temperature Controller
The Autonics TX4S-B4R is a temperature controller supporting thermocouple and RTD inputs with a 50 ms sampling cycle. It provides relay control and alarm outputs and supports ON/OFF, P, PI, PD, and PID control methods. Modbus RTU is available as an option output.
Technical Specifications
| Specification | Details |
|---|---|
| Power supply | 100–240VAC, 50/60Hz |
| Power consumption | Max. 8VA |
| Sampling cycle | 50 ms |
| Input | Thermocouple K (CA), J (IC), T (CC), R (PR), S (PR), L (IC); RTD DPt100Ω, Cu50Ω |
| Control output | Relay, 250VAC 3A / 30VDC 3A, 1a |
| Alarm output | AL1/2, 250VAC 3A, 1a |
| Option output | Modbus RTU |
| Control methods | ON/OFF, P, PI, PD, PID |
| Display | 11-segment LCD (White, Green, Yellow) |
| Protection | IP50 front panel (IEC standards) |
| Environmental conditions | −10 to 50°C ambient temperature; 35 to 85%RH ambient humidity, with no freezing or condensation |
Frequently Asked Questions
Is Modbus RTU included as a standard output on the TX4S-B4R?
The available product information identifies Modbus RTU as an option output. It should therefore not be assumed to be a standard output without confirming the required configuration before ordering.
What should be checked when selecting a sensor for the TX4S-B4R?
Confirm that the sensor matches one of the supported input types: K, J, T, R, S, or L thermocouple, or DPt100Ω or Cu50Ω RTD. The required sensor type should be verified against these supported inputs before selection.
Does the IP50 rating apply to the entire TX4S-B4R enclosure?
No. The specified IP50 protection applies to the front panel. It should not be interpreted as an IP50 rating for the complete unit.
Documents
Click to download the Autonics TX4S-B4R Temperature Controller datasheet