null

DATEXEL Temperature Transmitter Device Din Rail Temperature Transmitters DAT 3015-I

Write a Review
SKU:
DAT 3015-I
MPN:
DAT 3015-I
Weight:
500.00 Grams
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
$309.00

Description

DAT3015-I from Datexel is a 4 channel Current input Modbus converter. The DAT3015I converts the Current analog signal to a 16-bit digital format. The data is transmitted by the MODBUS RTU protocol on RS-485. The input Current on the DAT3015I is -20 to 20mA it is programmable for 0-20mA and 4-20mA input. The DAT3015I is also available in the RS232 format.

DAT3015-I from Datexel comes with the following features:

  • Field-Bus remote data acquisition.
  • Modbus Slave device on RS-485.
  • Modbus RTU/ Modbus ASCII protocol.
  • 4 channels input up to ± 20mA.
  • Watch-Dog Alarm.
  • Remotely Configurable.
  • 2000 Vac 3-ways Galvanic Isolation.
  • High Accuracy.
  • UL / CE mark.
  • DIN rail mounting in compliance with EN-50022.

Brand Information

Datexel products are made to the very highest standards and all products carry the CE mark, and since March 2015 all slim-line products and DAT3000 modules carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safe environments. In July 2006, Datexel confirmed its products to the RoHS Directive Standard (2002/95/EC) which imposes restrictions on the use of dangerous substances for the manufacturing of electric and electronic equipment. Situated in Jupiter, Florida USA.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

Input:
none
Current:
Min:-20mA. Max: 20mA.
Input accuracy (1) Current:
± 20 uA.
Linearity (1) Current:
± 0.1 % f.s.
Input impedance:
<= 22 Ω.
Thermal drift (1) Full Scale:
± 0.005 %/°C.
Sampling time:
0.5 ÷ 1 sec.
Data transmission:
Baud Rate: 38.4 Kbps Max. Distance: 1.2 Km (4000 ft).
Power supply:
none
Power supply:
voltage 10 …30Vdc.
Reverse polarity protection:
60 Vdc max.
Current consumption current output:
30mA max.
Isolation:
none
Input – RS485:
2000 Vac 50 Hz, 1 min.
Supply – Input:
2000 Vac 50 Hz, 1 min.
Supply – RS485:
2000 Vac 50 Hz, 1 min.
Environmental conditions:
none
Operative temperature:
-20°C …+60°C.
UL Operative temperature:
-10°C…+60°C.
Storage temperature:
-40°C…+85°C.
Humidity (not condensed):
0 …90 %.
Maximum altitude:
2000m.
Installation:
Indoor.
Category of installation:
II.
Pollution Degree:
2.
Mechanical specifications:
none
Material:
Self-extinguish plastic.
IP code:
IP20.
Wiring:
Wires with diameter 0.8÷2.1 mm2 /AWG 14-18
Tightening torque:
0.5 Nm.
Mounting:
In compliance with DIN rail standard EN-50022 and EN-50035
Weight:
About 150g.
Certification (EMC):
none
Immunity:
EN 61000-6-2.
Emission:
EN 61000-6-4.
Certification UL:
none
US standard:
UL 61010-1.
Canadian standard:
CSA C22.2 No 61010-1.
C CN:
NRAQ/NRAQ7.
Typology:
Open Type device.
Classification:
Industrial Control Equipment
File no.:
E352854
View AllClose