null
Datexel

Remote I/O module Analog Output - DAT3024 ISO

(No reviews yet) Write a Review
SKU:
DAT 3024-ISO
Weight:
150.00 Grams

Description

Datexel Remote I/O module Analog Output - DAT3024 ISO

4 Channels, Watch dog Alarm, CE mark, Highly Accurate – Italian Made

The DAT3024-ISO device generates 4 output analog signals from digital commands. The data are transmitted with MODBUS RTU/MODBUS ASCII protocol on the RS-485 network. To ensure the plant safety, one Watch-Dog timer alarm is provided.

The output channels are configurable independently.

For each channel it is possible to set:

- Type and output value;

- Preset of the value at the power up (Power-up) separated for output voltage and current;

- Preset of safety value (Safe) separated for output voltage and current.

It is possible to generate voltage signals up to 10V and current signals up to 20mA, both active or passive loops.

The device guarantees high accuracy and stable measure versus time and temperature.

The isolation between the parts of circuit removes eventual ground-loop effects, allowing the use of the device even in the heavy environmental conditions. The device is housed in a rough self-extinguishing plastic container which, thanks to its thin profile of 17.5mm only, allows a high density mounting on EN-50022 standard DIN rail.

COMMUNICATION PROTOCOLS

The DAT3024-ISO is designed to work with the MODBUS RTU/MODBUS ASCII protocol: standard protocol in field-bus; allows to directly interface DAT3000 series devices to the larger part of PLCs and SCADA applications available on the market.

Remote I/O module DAT3024 ISO features following advantages:

  • Field-Bus remote data acquisition
  • Modbus Slave device on RS-485
  • Modbus RTU/ Modbus ASCII protocol
  • 4 isolated output channels
  • Outputs configurable as Voltage or Current
  • Watch-Dog Alarm
  • Remotely Configurable
  • 1500 Vac 3-ways Galvanic Isolation
  • High Accuracy
  • CE mark
  • DIN rail mounting in compliance with EN-50022

Output Remote I/O module DAT3024 ISO

  • Current 0 mA +20 mA
  • Voltage 0 V +10 V

Response time

  • (from 10 % to 90 % ) 15 ms
  • Sample time 50 ms

Data Transmission

  • Baud Rate 115.2 Kbps
  • Max. distance 1.2 Km – 4000 ft

POWER SUPPLY

  • Power supply voltage 20 .. 30 Vdc
  • Reverse polarity protection 60 Vdc max
  • Current consumption 150 mA max.

ISOLATION

  • On all the ways 1500 Vac, 50 Hz, 1 min

ENVIRONMENTAL CONDITIONS

  • Operative Temperature -20°C .. +60°C
  • Storage Temperature -40°C.. +85°C
  • Humidity (not condensed) 0 .. 90 %
  • Maximum Altitude 2000 m
  • Installation Indoor
  • Category of installation II
  • Pollution Degree 2

MECHANICAL SPECIFICATIONS

  • Material Self-extinguish plastic
  • IP Code IP20
  • Wiring wires with diameter 0.8÷2.1 mm2/AWG 14-18
  • Tightening Torque 0.5 N m
  • Mounting in compliance with DIN rail standard EN-50022
  • Weight about 150 g.

CERTIFICATIONS

  • EMC (for industrial environments)
  • Immunity EN 61000-6-2
  • Emission EN 61000-6-4

  

Series Information

“DAT3000 SERIES” data acquisition and control modules

The distributed I/O modules of the DAT3000 series represent a complete solution for the acquisition and control of the analog and digital I/O signals.

The series is composed of:

• Serial line converters and repeaters (DAT3580, DAT3580 USB, DAT3580 MBTCP, DAT3590).

• Modules for digital inputs and outputs (DAT3130, DAT3140, DAT3148/8, DAT3148/12, DAT3188/4, DAT3188/8).

• Modules for analog inputs (DAT3011, DAT3014, DAT3015, DAT3016, DAT3017, DAT3018, DAT3019).

• Modules with analog outputs (DAT3022, DAT3024, DAT3028).

The devices communicate on the RS-485 serial line by the MODBUS RTU communication protocol and are able to communicate with the host computer on multipoint net using only two wires

About Datexel:

Founded in 1992 from the commitment and aspiration of several partners as a small provincial company, through the years DATEXEL has become an established reality on Italian and international markets as a manufacturer of electronic equipment for industrial automation and control process.

The range of DATEXEL products includes: Transmitters, signal and temperature Converters (both analogue and digital), galvanic Isolators, signal Splitters, I/O Modules, Trip Amplifiers, Power Supply Units, current loop Isolators, analogue and digital Displays.

Documents

To View Data Sheet for Datexel Remote I/O module Analog Output - DAT3024 ISO Please Click Here
View AllClose

Warranty Information

One Year Warranty
View AllClose

Additional Information

Output:
4 Channels 0-20mA , 4-20mA,0-10Volt
Power Supply:
Power supply voltage 20 .. 30 Vdc Reverse polarity protection 60 Vdc max
Current Consumption:
Current consumption 150 mA max.
Temperature rating:
Operative Temperature -4°F +140°F -20°C +60°C Storage Temperature -40°F +185°F -40°C +85°C
Humidity:
(not condensing) 0-90%
Housing:
Material self-extinguishing
Dimensions:
W x L x H 3 3/4X 3 1/2 X 1 7/8 inch, 90 x 74 x 48mm
Weight:
150 g
EMC:
Immunity EN 61000-6-2, Emission EN 61000-6-4
Isolation:
Between Modbus Master, Slave/Power supply 1500Vac, 50Hz, 1 Minute
Configuration:
PC Configurable
View AllClose