CL-327A Multifunction calibrator

(No reviews yet) Write a Review
SKU:
CL-327A
MPN:
CL-327A
Weight:
500.00 Grams
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
$1,497.00

Description

The calibrator or process calibrator is used for basic measuring, testing and regulation techniques for setting and verifying test installations and instrumentation. These measurement signals or regulated magnitudes are denominated as the test signal, which the calibrator can provide.

CL-327A from Tecpel is a battery-powered, hand-held process calibrator that allows process technicians to simulate and source variables signals. Output signals including DC voltage, DC current, ohms, analog transmitters, thermocouple, RTD, frequency, pulse, Switch On-OFF, are widely used in measurement and calibration for industrial field and laboratory application, it is one of the necessary tools used to test and calibrate industrial automation systems and instruments.

CL-327A from Tecpel from Tecpel comes with the following general characteristics:

  • The basic accuracy of the output of up to 0.02%, the output is displayed as 6 digits. 
  • The output functions: DC voltage, DC current, ohms, analog transmitters, thermocouple, RTD, frequency, pulse, Switch On-OFF.
  • The DC current output can provide 25 percent and 100 percent of manual stepping, automatic step and auto ramp output function.
  • The thermocouple output can provide high-precision automatic cold junction compensation, or temperature display.
  • Outside with a high-precision temperature probe, accuracy: ± 0.2 .
  • Large-screen LCD display multiple data can be displayed simultaneously: DC current and % values, thermocouples, temperature values of thermal resistance and the corresponding indexing values, etc..

Other Features:

  • The operating performance is superior keyboard configuration, set the value corresponding to the output bit setting change keys and LCD display.
  • Temperature Coefficient: 0.1 times the applicable accuracy, specification per degree C for 5to 18and 28to 50.
  • The range of the internal temperature compensation sensor is from 0to 40, Compensation error ≤±0.5.
  • The accuracy of the temperature probe: ±0.2. The range of the measured temperature is form -20-100.
  • Maximum voltage between any output terminal and earth: 30Vp-p
  • Maximum output current: Approximately 25mA.

 

Brand Information

Tecpel Co. Ltd. has over 20 years of experience in the Test and Measurement market. They have set up over 50 country distributors worldwide. Some of their products have been branded by famous leaders in the market. About 60% of their customers are repeat customers. Tecpel imports products from Japan and carries out quality checks. Their products are exported to Europe mainly. If customers find a fault with the product, they will replace it with a new product within 2-3 days. They are regarded as one of the leading Taiwanese manufactures of high quality test and measurements. Their product lines include power supplies, oscilloscopes, electronics & electrical meters and testers. Tecpel’s quality products have been accepted by some well-known international customers. The confidence they have in their products is reflected in their one-year warranty and by their flat-rate service policy through 3-5 years.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One-Year Warranty
View AllClose

Additional Information

• Working temperature and humidity:
0 to 50ºC, ≤80% RH non-condensing 40 to 50ºC, ≤70% RH Rate.
• Storage temperature and humidity:
-25 To 60ºC, ≤90% RH non-condensing.
• Display and backlight:
Segment LCD dual display. White LED backlight.
• Power supply:
4 x 1.5V AAA alkaline batteries.
• Automatic shutdown:
Can set auto-off time from 0 to 60 minutes.
• Size and Weight:
205 × 95 × 42 (mm), approximately 500g.
• Flash Color:
Xenon white 6,500 deg K.
• Flash Duration:
60-100 µsec.
• Flash Energy:
4 Watt-seconds (Joules).
• Beam Angle:
80 degree.
• Size:
8.3"" x 4.8"" x 4.8"".
• Weight:
2.2 lbs.
• Power:
110V +/-15%, 50/60 Hz or 220V +/- 15%, 50/60 Hz (Order to make).
• Accessory:
Power Cord (UL, British, or VDE available).
View AllClose