Datexel Control Modules

The DAT10024 Isolated ModBus RTU 4-20 mA output module acts as a four channel Modbus RTU Isolated Current and Voltage output converter. This product has the ability to operate with Modbus ASCII and has the option to select a 0-10 Vdc output. Each...

The Modbus RTU DAT10019 acts as a 8 channel RTD to Modbus RTU slave device with DIP switches. The DIP switches have their usability to set the Address, Baud rate, parity and RTU or ASCII. This product can also performs conversions of Resistances to...

The Modbus RTU DAT10018 acts as a 8 channel Thermocouple and mV Modbus RTU and Modbus ASCII converter. This product can receive input from K, J, R, S, B, E, T and N type thermocouples and mV in the ranges of -50 mV to +50 mV, -100 mV to +100 mV, and...

The Modbus RTU DAT10017-V acts as a 8 channel input device that accepts 8 Voltage inputs. The Voltage input can receive 0-10 Vdc, 1-5 Vdc 2-10 Vdc and -10 to +10 Vdc input. It also provides 3 way Isolation between the Input, Output and power supply...

The 4-20mA to Modbus RTU DAT10017-I acts as an 8 channel input device that accepts from 4-20 mA 0-20 mA and -20 to +20 mA inputs. It also gives 3 way Isolation between the Input, Output and power supply. This product can also perform working on a...

The Modbus RTU DAT10016 acts as a 4 channel Thermocouple and mV Modbus RTU and Modbus ASCII converter. This product has its acceptance of input from K, J, R, S, B, E, T and N type thermocouples and mV in the ranges of -50 mV to +50 mV, -100 mV to +100...

The Modbus RTU DAT10015 acts as an 8 channel input device that accepts 4 Current inputs and 4 Voltage inputs. The Current input which is given can be 4-20 mA 0-20 mA and -20 to +20 mA input. The Voltage input can receive 0-10 Vdc, 1-5 Vdc 2-10 Vdc and...

The Modbus RTU DAT10014 acts as a 4 channel RTD to Modbus RTU slave device with DIP switches. The DIP switches have its uses for setting up the Addresses, Baud rate, parity and RTU or ASCII. This product also performs conversions of Potentiometers and...

The Modbus RTU DAT10188 acts as an 8 Digital input and 8 Digital output Modbus RTU device. The 8 digital input which are present on state between 10 and 30 V and off set below 3 V. There is also sample time which is 5 ms. There are 8 Digital outputs are...

The Modbus RTU DAT10148 acts as a 16 Digital input Modbus RTU device. There are 16 digital inputs are on state between 10 and 30 V and off set below 3 V. It also includes a sample time which is 5 Ms. There is also provision of 3 way isolation between...