Autonics
Photoelectric Sensor BEN Series, Through-Beam, 10m, Relay Output - BEN10M-TFR
- SKU:
- BEN10M-TFR
- Weight:
- 500.00 Grams
Description
Autonics BEN10M-TFR
The Autonics BEN10M-TFR is a through-beam photoelectric sensor with a 10 m sensing distance. It uses an infrared LED (850 nm) light source and detects opaque targets with a minimum diameter of Ø16 mm.
Technical Specifications
| Specification | BEN10M-TFR |
|---|---|
| Sensing type | Through-beam type |
| Sensing distance | 10 m |
| Sensing target | Opaque material of min. Ø16 mm |
| Light source | Infrared LED (850 nm) |
| Response time | Max. 20 ms |
| Power voltage | 24–240 VAC ±10%, 50/60 Hz; 24–240 VDC ±10% (ripple P-P: max. 10%) |
| Current consumption | Emitter/Receiver: Max. 4 VA |
| Operation mode | Light ON/Dark ON (set by switch) |
| Control output | Relay |
| Connection type | Cable type (Ø5, 2 m) |
| Ambient illumination | Sunlight: Max. 11,000 lx; incandescent lamp: Max. 3,000 lx (received illumination) |
| Ambient temperature | -20 to 65°C; storage: -25 to 70°C |
| Protection structure | IP50 |
| Ambient humidity | 35 to 85% RH; storage: 35 to 85% RH |
| Accessories | Adjuster driver, fixing bracket, bolts, nuts |
| Weight | Approx. 354 g (including packaging) |
The specified ambient temperature and humidity ranges apply under non-freezing and non-condensing conditions.
Frequently Asked Questions
Does the 354 g weight refer to the sensor itself?
No. The stated approximate weight of 354 g includes packaging. A separate unit-only weight is not provided in the available product information.
What should be considered if the installation may experience freezing or condensation?
The specified ambient temperature and humidity ranges apply only under non-freezing and non-condensing conditions. The available information does not establish operation outside those conditions.
Can the BEN10M-TFR be selected for an electrical load based only on the stated relay output?
The available information identifies the control output as a relay but does not provide relay contact or load ratings. Those ratings should be confirmed from applicable manufacturer technical documentation before determining load compatibility.
Can detection be assumed for opaque targets smaller than Ø16 mm?
No such performance is established by the available information. The verified sensing target specification is an opaque material with a minimum diameter of Ø16 mm.
Documents
Autonics BEN10M-TFR datasheet
Additional Information
Sensing type: |
Through-beam type |
Sensing distance: |
10m |
Sensing target: |
Light source |
Light source: |
Infrared LED(850nm) |
Response time: |
Max. 20ms |
Power supply: |
24-240VAC~ ±10% 50/60Hz, 24-240VDC ±10%(ripple P-P: max. 10%) |
Current consumption: |
Emitter/Receiver: Max. 4VA |
Operation mode: |
Light ON/Dark ON(set by switch) |
Control output: |
Relay |
Connection type: |
Cable type(Ø5, 2m) |
Environment_Ambient illumination: |
Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) |
Environment_Ambient temperature: |
-20 to 65℃, storage: -25 to 70℃ |
Protection structure: |
IP50 , Approval |
Environment_Ambient humidity: |
35 to 85% RH, storage: 35 to 85% RH |
Material: |
Case, Case cover: Heat resistant Acrylonitrile butadiene styrene, |
Related Products
Related Products
Photo Sensor 15m Sensing Distance, Relay Output - BX15M-TFR
Autonics
Photo Sensor 15m Sensing Distance, Relay Output - BX15M-TFR-T
Autonics
Universal AC/DC Photoelectric Sensors BEN Series
Autonics
Photo Sensor 10m Sensing Distance, Relay Output - R3JK-10A3
Riko
Cylindrical Photoelectric Sensors (Narrow Beam Reflective Type) BR Series
Autonics