Description
Autonics AT8N Overview
The Autonics AT8N Multi Function Timer is an 8-pin plug-type analog timer for industrial timing control. It supports selectable timing operation modes including Power ON Delay, Flicker, and Interval functions.
The AT8N provides a control time setting range from 0.05 sec to 100 hour. It is designed for panel installation and uses an 8-pin socket such as PG-08 or PS-08(N), sold separately.
Key Features & Engineering Benefits
- Multi-function timing control: Supports A, A1, B, F, F1, and I output operation modes.
- Wide timing range: Control time setting range from 0.05 sec to 100 hour.
- 8-pin plug type: Designed for socket-based panel installation.
- Selectable relay output: Time limit DPDT or instantaneous SPDT plus time limit SPDT depending on output mode.
- Industrial contact rating: 250VAC 5A or 30VDC 5A resistive load.
- Operation visibility: Includes operation/power indicator and time limit output indicator.
Ordering Information & Part Number Breakdown
| Code | Description |
|---|---|
| AT | Analog Timer |
| 8 | 8-pin plug type |
| N | Time limit 2c or instantaneous 1c + time limit 1c selectable by output operation mode |
Technical Specifications
| Parameter | Specification |
|---|---|
| Function | Multi Function Timer |
| Control Time Setting Range | 0.05 sec to 100 hour |
| Power Supply | 100-240VAC 50/60Hz, 24-240VDC universal |
| Control Output | Time limit DPDT (2c) or instantaneous SPDT (1c) + time limit SPDT (1c) |
| Contact Capacity | 250VAC 5A, 30VDC 5A resistive load |
| Ambient Temperature | -10 to 55℃, storage: -25 to 65℃ |
Technical FAQ & Troubleshooting
Which sockets are compatible with the AT8N timer?
The AT8N uses an 8-pin plug type connection. Autonics specifies PG-08 and PS-08(N) sockets as compatible options, sold separately.
When should AT8N setting changes be made?
Autonics states that setting time, time range, operation mode, and related settings should be changed after turning off timer power.
What should be checked if flicker mode is used?
For F and F1 flicker output modes, the setting time should be over 100 ms. Settings below 100 ms may cause abnormal output operation.
B2B Supply & Expert Support
Dubai Sensor supplies the Autonics AT8N timer for UAE and GCC industrial procurement requirements. Engineering support is available for product selection, replacement checks, and control panel sourcing.