TECPEL Electricals and Electronics Testing Multimeters DMM-124

Write a Review
500.00 Grams
Minimum Purchase:
1 unit
Calculated at Checkout


A multimeter or a multi-tester, also known as a VOM (volt, ohm, milli-ammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure voltage, current, and resistance. Analog multimeters use a micro-ammeter with a moving pointer to display readings.

DMM-124 from Tecpel is a low-cost digital multimeter and type-K temperature measurement meter.

DMM-124 from Tecpel comes with the following properties:

  • 3-1/2 Digit, 1.2% basic accuracy.
  • 8 Functions, 23 ranges.
  • DCV, ACV, and Ohms measurement.
  • Capacitance 20μF~20mF.
  • Frequency measurement 10Hz to 40 kHz.
  • Type K Temperature measurement –20~750, -4~1400℉.
  • Phase indicator.
  • Diode/Continuity test (beeper).


Brand Information

Tecpel Co. Ltd. has over 20 years of experience in the Test and Measurement market. They have set up over 50 country distributors worldwide. Some of their products have been branded by famous leaders in the market. About 60% of their customers are repeat customers. Tecpel imports products from Japan and carries out quality checks. Their products are exported to Europe mainly. If customers find a fault with the product, they will replace it with a new product within 2-3 days.


They are regarded as one of the leading Taiwanese manufactures of high quality test and measurements. Their product lines include power supplies, oscilloscopes, electronics & electrical meters and testers. Tecpel’s quality products have been accepted by some well-known international customers. The confidence they have in their products is reflected in their one-year warranty and by their flat-rate service policy through 3-5 years.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One-Year Warranty
View AllClose

Additional Information

DC Voltage Ranges:
2mV, 2V, 20V, 200V, 600V, ± (1.2%+1dgt).
AC Voltage Ranges:
200mV, 200V, 500V ± (2.0%+4dgts).
Resistance Ranges:
200, 2k, 20k, 200k, 2000kΩ, ± (1.0~2.0%+4dgts) 200Ω~10MΩ.
Capacitance range:
20uF, 200uF, 2000uF, 20mF.
-20℃~750℃, -4℉~1400℉, ± (3.0%rdg+2℃), ±(3.0%rdg+4℉).
Frequency Range:
Auto ranging 10Hz to 40kHz, ± (0.1%+2dgts).
Phase Indicator:
Freq. 45Hz to 450Hz, Voltage: 80V to 480V.
Overload protection:
Temperature:60VDC or 24V AC RMS.
250V/1.5A 500V DC for other ranges.
Power Requirement:
One 9V battery.
5.8""x2.8""x1.5"" (147x70x39mm).
12 oz (340g).
The test leads, holster, battery, K-type therm◦Couple and owner’s manual.
View AllClose