Home

Honeywell Industrial Pressure Sensor PX2 Series

Heavy Duty Pressure Transducer

• Pressure range: 1 bar to 70 bar | 100 kPa to 7 MPa | 15 psi to 1000 psi

• Pressure reference: Absolute, sealed gage or vented gage

• Response time: <2 ms

The Pressure Transducer for Industrial automation

The Honeywell PX2 Series Heavy Duty Pressure Transducers are a portfolio of configurable pressure sensors that use piezoresistive sensing technology with ASIC (Application Specific Integrated Circuit) signal conditioning in a stainless steel housing. The PX2 Series is fully calibrated and compensated for offset, sensitivity, temperature effects and non-linearity using the on-board ASIC. These transducers measure absolute, sealed gage, or vented gage pressure. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure, sealed gage versions have an internal pressure reference of one atmosphere at sea level, and vented gage versions measure pressure with respect to ambient pressure. They are RoHS compliant and are designed and manufactured according to ISO 9001 standards.

Main Features

Pressure range: 1 bar to 70 bar | 100 kPa to 7 MPa | 15 psi to 1000 psi

Pressure reference: Absolute, sealed gage or vented gage

Pressure port types: 7/16-20 UNF 1/4 in 45° Flare Female Schrader (SAE J512), 7/16-20 UNF 45° Flare Male (SAE J513), 7/16-20 UNF 37° Flare Male (SAE J514), G1/4 (ISO 1179-3), G1/8 (ISO 1179-3), M12 x 1.5 (ISO 6149-3), 1/4-18 NPT, 1/8-27 NPT, 9/16-18 UNF, (SAE J1926-3), or 7/16-20 UNF (SAE J1926-3)

Electrical connector types: Metri-Pack 150 (UL 94 HB or V-0 options), Micro M12, DIN, Deutsch, or cable harness (1 m, 2 m, 3 m, or 5 m)

Total Error Band: ±2.0 %FSS

Operating and compensated temperature range: -40°C to 125°C [-40°F to 257°F]

Response time: <2 ms < li>

Life: Minimum of 10 million cycles to operating pressure

Output transfer function: Ratiometric, regulated or current

RoHS, REACH, CE and UKCA compliant

Mechanical shock rating: 100 G per MIL-STD-202F, Method 213B, Cond. F

Vibration rating: 20 G sweep, 10 Hz to 2000 Hz

Ingress protection: Up to IP69K

Radiated immunity protection: Up to 100 V/m (ISO 11452-2)

Flame retardant options: UL 94 HB standard on all electrical terminations; UL 94 V-0 available upon request

Here you can click to see all Pressure Transmitter products.

Do you want to know about top brands and their best seller products in UAE? Click the link below to read our article:

Media compatibility:

: Common HFC (hydrofluorocarbon) refrigerants such as R410A and R134A, next generation low global warming potential (GWP) refrigerants such as R448A (Solstice® N40), R32 and R1234ZE, engine oil, petroleum-based hydraulic fluids, DOT 3 brake fluid, and dry air. For ammonia and other corrosive media, see Honeywell’s SPT Series

Enhanced durability:

: The PX2 Series can operate in the rigorous environments commonly found in HVAC/R and air compressor applications. The sensor can survive at least 10 million pressure cycles and has an ingress protection rating up to IP69K.

Do you like to know how these sensors work? Check our article to find out about them:

Pressure sensor (Pressure Transducer, Pressure Transmitter, Pressure Switch, Pressure Gauge,Difference between all Terms.

PDF Download