DT-2236A Digital Tachometer

(No reviews yet) Write a Review
SKU:
DT-2236A
MPN:
DT-2236A
Weight:
500.00 Grams
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
$407.00

Description

tachometer (revolution-counter, tach, rev-counter, RPM gauge) is an instrument measuring the rotation speed of a shaft or disk, as in a motor or other machine. The device usually displays the revolutions per minute (RPM) on a calibrated analogue dial or a digital display.

DT-2236A Digital Photo/Contact Tachometer from Tecpel is an ideal instrument for measurement of rotational speed at rotating surfaces, rolls, wheels... The user can choose the contact measuring mode with direct contact to the surface of the rotating part or the non-contact mode (optical mode). The optical measurement needs small reflecting types for remitting the signal to the instrument.

DT-2236A from Tecpel comes with the following properties:

  • Optical measurement with reflecting tape stripe (rpm).
  • Contact measurement with conical adaptor (rpm).
  • Contact speed measurement with surface wheel (m/min).
  • ABS- plastic housing.
  • 5-digit LCD-display (turns automatically to the site of measuring mode).
  • Min- max- peak- hold.

Product Specifications

Features

Range/Description

  • Photo tachometer measurement

5 to 99,999 RPM.

  • Contact tachometer measurement

0.5 to 19,999RPM.

  • Surface speed:

M/min. - 0.05 to 1,999.9 M/min. ft/min. - 0.2 to 6,560 ft/min.

 

  • RPM

0.1 RPM (< 1,000RPM) 1 RPM (> 1,000RPM) m/min.: 0.01 m/min. (< 100 m/min.) 0.1 m/min. (> 100 m/min).

  • Resolution: ft/min.

0.1 ft/min. (< 1,000 ft/min.) 1 ft/min. (> 1,000 ft/min.).

  • Display

5 digits, 10 mm (0.4"").

  • LCD Accuracy

± (0.05% + 1 digit).

  • Time base

Quartz crystal Circuit: Exclusive one-chip of microcomputer LSI circuit Operating.

 

  • Temperature

0°C to 50°C (32°F to 122°F).

  • Temperature Range

-100°C to 850°C, -148°F to 1562°F.

  • Operating humidity

Less than 30% R.H.

  • Memory

Last/Max/Min. value.

  • Battery

4 x 1.5V AA (UM-3) batteries Photo type: Approx. DC 153mA.

  • Power consumption

Contact type: Approx. DC 10mA.

  • Size

195 x 61 x 38.5 mm. (7.6 x 2.4 x 1.5 inch).

  • Weight

230 gr. (0.6 LB) including batteries.

  • Accessories included

RPM adapter (CONE), RPM adapter (FUNNEL), Surface speed test wheel and instruction manual.

 

Brand Information

Tecpel Co.  Ltd. has over 20 years of experience in the Test and Measurement market. They have set up over 50 country distributors worldwide. Some of their products have been branded by famous leaders in the market. About 60% of their customers are repeat customers. Tecpel imports products from Japan and carries out quality checks. Their products are exported to Europe mainly. If customers find a fault with the product, they will replace it with a new product within 2-3 days.

They are regarded as one of the leading Taiwanese manufactures of high quality test and measurements. Their product lines include power supplies, oscilloscopes, electronics & electrical meters and testers. Tecpel’s quality products have been accepted by some well-known international customers. The confidence they have in their products is reflected in their one-year warranty and by their flat-rate service policy through 3-5 years.

View AllClose

Warranty Information

One-Year Warranty
View AllClose