DATEXEL Temperature Transmitter Device Transmitter For Explosive & Safe Environment DAT5030IS/A

Write a Review
500.00 Grams
Minimum Purchase:
1 unit
Calculated at Checkout


DAT5030IS/A from Datexel is an Intrinsic Safety Barrier current loop repeater and DIN Rail mount signal repeater. The input is current loop and output can be either Current loop or Voltage. The input can be Active or Passive power supply meaning the excitation voltage can be supplied by the field equipment or the loop can be powered by the DAT5030ISA. Also, the output can either be Active or Passive but with the additional output range of 0-10V or 2-10V. There is also an auxiliary power supply of 15 Volts on the input side and an auxiliary power supply of 12 Volt on the output side.

The DAT5030ISA is accurate to 0.1% full-scale and has less than 0.01%/°f thermal drift.

The DAT5030ISA also provides isolation of 2000Vac between the input and output signal, and isolation of 1500Vac between the power supply and the output signal.

This eliminates the effects of any ground loops and allows the use of the transmitter in heavy environmental conditions found in industrial applications. The DAT5030ISA is in compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.

The DAT5030ISA is housed in a plastic enclosure of 22.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.

DAT5030IS/A from Datexel comes with the following features:

  • Protection mode: 
  • (1) G [ Ex ia Ga ] IIC
    (1) D [ Ex ia Da ] IIIC according to the Directive ATEX 2014/34/EU.
  • Power supply for current loop in a hazardous area (ZONE 0).
  • 0-20mA or 4-20mA active or passive configurable input.
  • 0-10V, 2-10V, 0-20mA, 4-20mA configurable output
  • DIP switch configurable.
  • Single or Double Channel.
  • HART Compatible on request.
  • 2000 Vac galvanic isolation between input and output.
  • EMC compliance with CE mark.
  • DIN rail mounting suitable.

Brand Information

Datexel products are made to the very highest standards and all products carry the CE mark, and since March 2015 all slim-line products and DAT3000 modules carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safe environments. In July 2006, Datexel confirmed its products to the RoHS Directive Standard (2002/95/EC) which imposes restrictions on the use of dangerous substances for the manufacturing of electric and electronic equipment. Situated in Jupiter, Florida USA.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

Input signal:
Active or passive current loop.
0÷20 mA or 4÷20 mA configurable.
Zero regulation:
± 5 %.
Span regulation:
± 5 %.
> 15V @ 20mA
Supply Input impedance:
< 25 Ω.
Output signal:
4÷20 mA, 0÷20 mA, 0÷10 V or 2÷10 V configurable.
Load resistance:
Voltage: > 5 KW Current: < 500 Ω.
Auxiliary Supply:
> 12V @ 20mA.
Power supply:
Supply Voltage:
20 ÷ 30 Vdc.
Current consumption:
80 mA per channel with Vaux operating.
Polarity inverted protection:
60 Vdc max.
Calibration error:
± 0.1 % f.s.
Linearity error (*):
± 0.2 % f.s.
Thermal drift:
0.02 % f.s./°C
Response time:
< 0.2 sec.
Frequency response ( HART Protocol ):
Bidirectional 0.5 ÷ 4 Khz @ 3dB
Isolation voltage input/output:
2000 Vac @ 50 Hz, 1 min.
Isolation voltage input/supply:
2000 Vac @ 50 Hz, 1 min.
Isolation voltage supply/output:
1500 Vac @ 50 Hz, 1 min.
Isolation voltage between channels:
2000 Vac @ 50 Hz, 1 min.
Electromagnetic Compatibility (EMC) ( for industrial environments ):
Immunity: EN 61000-6-2; Emission : EN 61000-6-4.
Operating temperature:
-20 ÷ 60 °C.
Storage temperature:
-40 ÷ 85 °C.
Relative humidity (non-condensing):
0 ÷ 90%.
Single channel: ~ 100 g. Double channel: ~ 160 g.
View AllClose