null

DATEXEL Temperature Transmitter Device Din Rail Temperature Transmitters DAT4531B

Write a Review
SKU:
DAT4531B
Weight:
500.00 Grams
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
$221.00

Description

DAT4531B from Datexel is an RTDTemperature converter and Isolated Resistor.nce converter that is a din rail mount Temperature converter. It is programmable by PC or DIP Switches. The DAT4531B accepts signal from various RTD's Pt100, Pt1000 Ni100, Ni1000. and Resistor.nce up to 2000Ohms. The DAT4531B converts this signal and makes the scale linearize. The DAT4531B provides Voltage or Current output.  

DAT4531B from Datexel comes with the following features:

  • Configurable input for RTD and Resistor.nce.
  • Configurable output in current or voltage.
  • Configurable by dip-switch or PC.
  • High accuracy.
  • On-field reconfigurable.
  • Galvanic isolation among the ways.
  • UL / CE mark.
  • Suitable for DIN rail mounting in compliance with EN-50022 and EN-50035

Brand Information

Datexel products are made to the very highest standards and all products carry the CE mark, and since March 2015 all slim-line products and DAT3000 modules carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safe environments. In July 2006, Datexel confirmed its products to the RoHS Directive Standard (2002/95/EC) which imposes restrictions on the use of dangerous substances for the manufacturing of electric and electronic equipment. Situated in Jupiter, Florida USA.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

Input:
none
Input types:
RTD, Resistor.
RTD:
> of ±0.1% f.s. or ±0.2°C.
Accuracy:
none
RTD:
The higher of ±0.1% and ±0.2°C.
Low Resistor.nce:
The higher of ±0.1% and ±0.15 Ω.
High Resistor.nce:
The higher of ±0.2% and ± 1Ω
Linearity (RTD):
± 0.1 % f.s.
Sensor excitation current (RTD, Resistor):
500uA.
Line Resistor.nce Influence (RTD 3-wire):
0.05%/ Ω (50 Ω max balanced)
Thermal Drift (full scale):
± 0.01% / °C
Output:
none
Current:
Min 0mA. Max.20mA.
Voltage:
Min.0V. Max.10V.
Output resolution:
none
Current:
7uA.
Voltage:
4mA.
Burnout values:
none
Max. output value:
22 mA or 10.6 V.
Min. output value:
0 mA or -0.6 V
Output load Resistance (R-load):
none
Current output:
≤ 500 Ω.
Voltage output:
≥ 10 KΩ.
Short-circuit current:
About 26 mA max.
Response time About:
500ms.
Power supply:
none
Power supply voltage:
18 …30Vdc.
Reverse polarity protection:
60 Vdc max.
Current consumption current output:
35mA max.
Current consumption voltage output:
20mA max.
20mA max.:
none
Among all the ways:
1500VAC, 50Hz, 1 min.
Environmental conditions:
none
Operative temperature:
-20°C …+60°C.
UL Operative temperature:
-10°C…+60°C.
Storage temperature:
-40°C…+85°C.
Humidity (not condensed):
0 …90 %.
Maximum altitude:
2000m.
Installation:
Indoor.
Category of installation:
II.
Pollution Degree:
2.
Mechanical specifications:
none
Material:
Self-extinguish plastic.
IP code:
IP20.
Wiring:
Wires with diameter 0.8÷2.1 mm2 /AWG 14-18
Tightening torque:
0.8 Nm.
Mounting:
In compliance with DIN rail standard EN-50022 and EN-50035
Weight:
About 90g.
Certification (EMC):
none
Immunity:
EN 61000-6-2.
Emission:
EN 61000-6-4.
Certification UL:
none
US standard:
UL 61010-1.
Canadian standard:
CSA C22.2 No 61010-1.
C CN:
NRAQ/NRAQ7.
Typology:
Open Type device.
Classification:
Industrial Control Equipment
File no.:
E352854
View AllClose