DATEXEL Temperature Transmitter Device Din Rail Temperature Transmitters DAT205 3W

Write a Review
DAT205 3W
DAT205 3W
500.00 Grams
Minimum Purchase:
1 unit
Calculated at Checkout


DAT205 (3W) from Datexel is a Potentiometer converter with a Voltage or Current output. The DAT205 3W has a separate power supply, and the added feature of holding the output with the use of the selection terminal. The input from a Potentiometer in the range of 0-1K Ohm to 0-10K Ohm is converted and designed to provide a voltage or current output that is proportional to the input. The output is on terminals F and H. The DAT205 is available in a 2 wire or 3 wire output. The power supply can be from 18 Vdc to 30 Vdc.

The DAT205 provides a small voltage across the windings on the potentiometer. As the wiper moves across the windings a potential difference is measured. The DAT205 can measure this small potential difference and converts this signal to an analog output signal. Span and zero adjustment screws are provided on top of the converter for ease of calibration and maintenance.

The DAT205 is In compliance with the standard 89/336/EEC on the Electromagnetic Compatibility. It is housed in a plastic enclosure of 17 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.

DAT205 (3W) from Datexel comes with the following features:

  • Input for potentiometer.
  • Zero and Span values adjustable by potentiometers.
  • Linearize output in voltage or current.
  • Command SEL for enables/disable the output.
  • High accuracy.
  • EMC compliant with CE mark.
  • Suitable for DIN rail mounting in compliance with EN 50022 and EN-50035

Brand Information

Datexel products are made to the very highest standards and all products carry the CE mark, and since March 2015 all slim-line products and DAT3000 modules carry the UL and CSA mark. Datexel obtained ISO 9001 in 1996 and now has the current standard UNI EN ISO 9001:2000 (issued in 2001). Datexel's signal conditioners also carry the ATEX 94/9/EC approval for safe environments. In July 2006, Datexel confirmed its products to the RoHS Directive Standard (2002/95/EC) which imposes restrictions on the use of dangerous substances for the manufacturing of electric and electronic equipment. Situated in Jupiter, Florida USA.

Data Sheet

To View Data Sheet Please Click Here
View AllClose

Warranty Information

One Year Warranty.
View AllClose

Additional Information

Sensor type:
Potentiometer's resistance:
Min. nominal value = 1 KΩ; Max. nominal value = 10 KΩ
Voltage reference:
Output type:
4 ÷ 20 mA, 0÷20 mA or 0÷10 V.
Maximum output signal:
15 V or 25 mA.
Load resistance (R-load):
Current output: ≤ 500 Ω; Voltage output: ≥ 2 KΩ.
SEL Command:
Disable input:
5 ÷ 30 Vdc.
Enable output:
0 Vdc or not connected.
Calibration error:
± 0.1 % of f.s.
Linearity error (*):
± 1 % of f.s.
Thermal drift:
0.02 % of f.s./°C.
Response time (from 10 to 90 % of f.s.):
500 ms.
Power supply voltage (**):
18÷30 Vdc.
Current consumption(***):
Current output: 30 mA max. Voltage output: 10 mA max.
Electromagnetic Compatibility (EMC for industrial environment ):
Immunity: EN 61000-6-2; Emission: EN 61000-6-4.
Operating temperature:
-20 ÷ 70 °C.
Storage temperature:
- 40 ÷ 85 °C
Relative humidity (non cond.):
0 ÷ 90%.
Maximum Altitude:
2000 m.
Category of installation:
Pollution degree:
50g approx.
Mechanical specifications:
Self-extinguish plastic.
IP code:
Wires with diameter 0.8÷2.1 mm2 /AWG 14-18.
Tightening torque:
0.8 Nm.
In compliance with DIN rail standard EN-50022 and EN-50035.
View AllClose